Ampco
Ampco W-72 Adjustable Wrench 10 in 1-5/16 in Natural
Non-sparking adjustable wrench in nickel-aluminium bronze with a 10-inch handle and 1-5/16-inch jaw capacity
- TypeAdjustable Wrenches
- Non-sparking safety for hazardous environments
- Nickel aluminium bronze construction resists corrosion
- 10 in length with 1-5/16 in jaw capacity
- Plain groove design for secure grip
Non-Sparking Adjustable Wrench
The Ampco W-72 is a 10 in adjustable wrench made from nickel aluminium bronze. Its jaw capacity reaches 1 5/16 in for a range of fastener sizes. The non-sparking material makes it suitable for environments where ignition risk must be avoided. It is intended for maintenance and assembly tasks in hazardous locations.
Thermals Noise and Power Draw
As a hand tool the wrench generates no heat and produces no operational noise. It requires no external power source and draws no current during use. The only thermal consideration is ambient temperature affecting the metal. Physical effort from the operator is the sole energy input.
Highlights
- Non-sparking safety for hazardous environments
- Nickel aluminium bronze construction resists corrosion
- 10 in length with 1-5/16 in jaw capacity
- Plain groove design for secure grip
Specifications
| Brand | AMPCO |
|---|---|
| Type | Adjustable Wrenches |
Questions about this item
How do I set the 1 5/16 in jaw on the Ampco W-72 without stripping the adjustment groove?
Turn the knurl wheel slowly until the movable jaw contacts the fastener flats, then back off a quarter-turn to seat the groove fully before applying torque.
Will the nickel-aluminium bronze jaws on this 10 in nonsparking wrench wear faster than steel and need replacement?
The alloy is softer than steel so jaws will mushroom sooner; inspect the 1 5/16 in opening regularly and replace the wrench when the profile no longer grips flats cleanly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
