Ampco
Ampco DW-1/2D1-7/16 1/2 in Drive 1-7/16" SAE Socket 6 Points tool storage
Nonsparking 1/2 in drive SAE socket with 6-point deep aluminium bronze construction, FM Approved to ASTM A342 standards
- FM Approved and ASTM A342 compliant for safety-critical environments
- Non-sparking aluminium-bronze construction reduces ignition risk
- 6-point deep socket grips fastener flats to prevent rounding
- 1/2 in drive fits standard ratchets and breaker bars
- SAE 1-7/16 in size matches large inch-format hardware
Non-sparking deep socket for hazardous areas
This 1/2 in drive SAE socket fits 1-7/16 in fasteners and is made from aluminium bronze. It carries FM approval and meets ASTM A342 for non-sparking tools. The six-point deep profile engages flats securely during hand operation. It is suited for maintenance crews in refineries, chemical plants and other flammable environments.
Hand-driven performance under sustained torque
The socket is rated for hand use only and is not impact rated. Aluminium bronze yields lower hardness than steel, so prolonged high torque can deform the walls or round the corners. Users should apply steady force with a breaker bar rather than sharp impacts. The deep well allows access to recessed bolts without needing an extension.
Thermal and handling characteristics
The material does not generate sparks when struck, reducing ignition risk in normal use. Aluminium bronze conducts heat faster than steel, so the socket warms quickly during extended turning. The unfinished surface offers a firm grip without plating that could chip. No power draw or noise considerations apply to this hand tool.
Highlights
- FM Approved and ASTM A342 compliant for safety-critical environments
- Non-sparking aluminium-bronze construction reduces ignition risk
- 6-point deep socket grips fastener flats to prevent rounding
- 1/2 in drive fits standard ratchets and breaker bars
- SAE 1-7/16 in size matches large inch-format hardware
Specifications
| Brand | AMPCO SAFETY TOOLS |
|---|
Questions about this item
Does the 1/2 in drive socket generate any heat or noise during extended use?
The 1/2 in drive socket is a passive hand tool made of aluminum bronze; it produces no heat or noise during operation.
What drive size ratchet or breaker bar is required to turn this 1-7/16 in socket?
A 1/2 in drive ratchet, breaker bar or impact wrench is required to engage the socket's square drive.
Will this deep 6-point socket fit the same fasteners as my existing 1/2 in drive SAE set?
Yes, it follows standard SAE sizing and 1/2 in drive geometry, so it works alongside other SAE sockets in your collection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
