We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four small spools of shiny dual-colour PLA filament, 1.75 mm diameter, silk finish

AMOLEN Silk PLA Dual Color Filament 1.75mm 4×200g

SKU CH-D375-QJTW3

Four dual-colour PLA spools totalling 800 g with a 1.75 mm diameter and ±0.02 mm tolerance for smooth, multi-hue FDM prints

  • Color200*4-dual Red Gold/Red Green/Red Blue/Blue Green
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1 kilograms
  • Vibrant multicolour prints from four dual-colour spools
  • Precise 1.75 mm diameter with ±0.02 mm tolerance
  • Smooth, jam-free extrusion with no warping or bubbles
  • 800 g total filament weight across four 200 g spools
  • Compatible with most FDM printers and high-speed machines

Versatile Silk PLA Bundle

AMOLEN Silk PLA Dual Color Filament arrives as a four-spool pack, each spool weighing 200 g for a total of 800 g. The 1.75 mm diameter suits most FDM 3D printers and 3D pens. Makers who want to test multicolour effects without committing to full-size spools will appreciate the variety.

Consistent Extrusion Under Load

A tight diameter tolerance of +/- 0.02 mm keeps flow steady during long prints. The material feeds smoothly without bubbles, jamming or warping, so layer adhesion remains reliable across extended builds. Reducing outer-wall speed further improves surface finish on high-speed machines.

Low-Temperature, Low-Odour Printing

Recommended nozzle temperatures sit between 200 and 220 °C with a bed range of 30 to 60 °C. PLA melts well at these settings, producing minimal odour and drawing modest power from the printer. The bundle is not suited for enclosed box-type AMS units but works with external AMS setups.

Highlights

  • Vibrant multicolour prints from four dual-colour spools
  • Precise 1.75 mm diameter with ±0.02 mm tolerance
  • Smooth, jam-free extrusion with no warping or bubbles
  • 800 g total filament weight across four 200 g spools
  • Compatible with most FDM printers and high-speed machines

Specifications

BrandAMOLEN
Model3DSKPACK
Color200*4-dual Red Gold/Red Green/Red Blue/Blue Green
MaterialPolylactic Acid
Diameter1.75
Weight1 kilograms

Questions about this item

Does the 1.75 mm silk PLA run hotter or noisier during long prints?

The filament itself does not generate heat or noise; it prints at 200–220 °C nozzle and 30–60 °C bed like standard PLA, so any sound or temperature comes from the printer, not the spool.

What printer hardware is required to use these four 200 g dual-colour spools?

Any FDM printer or 3D pen that accepts 1.75 mm filament works; the spools also fit external AMS units but not enclosed box-type AMS systems.

Will the +/- 0.02 mm tolerance cause issues on an older Bowden extruder?

The tight tolerance and smooth feed are designed to prevent jams and clogging, so even older Bowden setups should print reliably without extra adjustments.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.