We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four small spools of dual-colour silk PLA filament in black with purple, red, green and blue transitions

AMOLEN Silk Dual Color PLA Filament 1.75mm 200g × 4 Spools 800g

SKU CH-9GPJ-R8YJK

Four 200 g spools of 1.75 mm silk PLA that shift between two colours in a single print

  • ColorDual Black Purple/Black Red/Black Green/Black Blue
  • MaterialPLA
  • Diameter1.75
  • Weight2.2 pounds
  • Vibrant variety with four dual-color shades in one pack
  • Smooth dual-color prints from a single spool without swapping filament
  • Precise 1.75 mm diameter with ±0.02 mm tolerance for consistent extrusion
  • Reliable feeding with no bubbles, jams or warping during printing
  • Broad compatibility with most FDM printers and 3D pens

Silk Dual-Color PLA Bundle

This AMOLEN filament pack contains four 200 g spools of silk PLA in dual black colour combinations totalling 800 g. Each spool is 1.75 mm diameter with a tolerance of ±0.02 mm for consistent extrusion on most FDM 3D printers.

Makers wanting colour variety without large spools

Ideal for hobbyists printing decorative items such as ornaments or costume pieces who want multiple colours in one purchase. Not suited for users who need single-colour engineering grades, high-temperature materials, or spool sizes larger than 200 g for long unattended prints.

Check printer compatibility and AMS needs

Verify your FDM printer accepts 1.75 mm PLA and can reach nozzle temperatures between 200 and 220 °C with a bed temperature of 30 to 60 °C. If you use an AMS system, an adapter spool is required for these 200 g rolls. Reduce outer-wall speed for the best silk surface finish.

Highlights

  • Vibrant variety with four dual-color shades in one pack
  • Smooth dual-color prints from a single spool without swapping filament
  • Precise 1.75 mm diameter with ±0.02 mm tolerance for consistent extrusion
  • Reliable feeding with no bubbles, jams or warping during printing
  • Broad compatibility with most FDM printers and 3D pens

Specifications

BrandAMOLEN
Model3DDCBU2B
ColorDual Black Purple/Black Red/Black Green/Black Blue
MaterialPLA
Diameter1.75
Weight2.2 pounds

Questions about this item

Will the 1.75mm diameter spools feed correctly on my FDM printer?

Yes, the 1.75mm diameter with +/- 0.02mm tolerance works with most FDM 3D printers and 3D pens on the market.

Can I use these 200g spools inside an AMS without extra hardware?

The 200g spools need an adapter spool for AMS use; search for the makerworld-Ziqpel-Amolen adapter spool model.

How do I verify the filament is printing correctly after loading?

Print a test at 200-220°C nozzle and 30-60°C bed; look for smooth feeding, no bubbles or jams, and a silky surface on outer walls.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.