We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
DB25 adapter with two RJ45 ports, black moulded finish

American Recorder Technologies

American Recorder Technologies DB25 to Dual RJ45 Adapter TASCAM Pinout

SKU CH-DDTY-PQ8KN

Connects DB25 audio gear via dual RJ45 jacks using CAT6 twisted pair for four low-noise channels per cable

  • Plug-and-play setup saves studio wiring time
  • Dual RJ45 jacks accept shielded CAT6 for four-channel audio paths
  • TASCAM digital/analog pinout matches Digidesign and Panasonic gear
  • Rugged moulded housing withstands rack and control-room use
  • Replaces bulky DB25 cables with lightweight twisted-pair runs

DB25 Adapter for TASCAM Pinout

This DB25-to-dual-RJ45 adapter provides a plug-and-play link between audio devices that use the TASCAM digital and analog pinout, including Digidesign and Panasonic gear. It replaces bulky custom cables with a lightweight, rugged molded unit that accepts standard shielded CAT6 patch leads. Studios, control rooms and equipment racks can be re-wired in seconds without waiting for made-to-order looms.

Thermals Noise and Power Draw

The adapter is a passive component with no active electronics, so it generates no heat, adds no fan noise and draws no power from the connected equipment. Signal integrity relies on the twisted-pair construction of the CAT6 cables, which keeps crosstalk and interference low across the four audio channels carried by each RJ45 connection.

CAT6 Cabling and Breakout Options

Each RJ45 jack carries four balanced channels over a single CAT6 run, reducing cable bulk and installation time compared with traditional multi-core looms. The same adapter works for both digital and analog signals, and the product line includes matching breakout adapters terminated in XLR, TRS or bare-end connectors for direct device termination.

Highlights

  • Plug-and-play setup saves studio wiring time
  • Dual RJ45 jacks accept shielded CAT6 for four-channel audio paths
  • TASCAM digital/analog pinout matches Digidesign and Panasonic gear
  • Rugged moulded housing withstands rack and control-room use
  • Replaces bulky DB25 cables with lightweight twisted-pair runs

Specifications

BrandAmerican Recorder

Questions about this item

How do I connect the DB25 adapter to my TASCAM-equipped gear?

Plug the DB25 end into the device’s DB25 port, then run shielded CAT6 cables from the two RJ45 jacks to the matching connectors on the other unit; each RJ45 carries four twisted-pair channels.

What upkeep will the adapter and CAT6 cables need over time?

The molded adapter itself is passive and needs no service; inspect the CAT6 cables periodically for jacket damage or crushed pairs and replace any cable that shows wear.

What is the first limitation I will hit on long runs with this adapter?

Signal integrity depends on the CAT6 cable, so the practical limit is the cable’s maximum recommended length before attenuation degrades the audio.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.