We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rotary fuel pump with clear 8ft anti-static hose and nozzle

American Forge & Foundry, Inc.

American Forge & Foundry, Inc. 8210 FM Approved Rotary Fuel Pump with 8ft Anti-Static Hose

SKU CH-QS5Z-WNB96

FM-approved rotary fuel pump with self-priming action, graphite vanes and 8 ft anti-static hose for safe vehicle refuelling

  • ColorTransparent
  • FM-approved safety for regulated refuelling
  • Self-priming rotary action starts flow instantly
  • Vacuum release prevents pressure build-up during use
  • 8 ft anti-static hose with non-sparking nozzle reduces ignition risk
  • Graphite vanes self-lubricate for long, wear-free service

FM Approved Rotary Fuel Pump

This FM Approved rotary fuel pump is built for workshops and fleet operators who need a self-priming transfer solution that meets national and international standards. It includes an 8ft anti-static hose with a non-sparking nozzle for safer fuel handling. The pump suits commercial refuelling of vehicles and equipment where compliance and spark prevention are required. It is not intended for buyers who need a metered dispensing system or a pump rated for fluids other than fuel.

Self-Lubricating Graphite Vanes

The pump uses graphite vanes that are self-lubricating and non-wearing, reducing friction and eliminating the need for external lubrication. This design keeps operating noise low and power draw minimal during normal refuelling tasks. A vacuum release mechanism prevents pressure build-up and supports smooth, continuous flow. The transparent housing allows quick visual checks without disassembly.

Sustained Refuelling Performance

Under sustained load the self-priming action maintains consistent delivery without loss of prime, supporting quick refuelling of multiple vehicles or large equipment tanks. The anti-static hose and non-sparking nozzle remain effective throughout extended sessions, reducing static discharge risk. Graphite vanes resist wear during prolonged operation, preserving flow rate over time. The unit is not suited for continuous industrial duty cycles beyond typical refuelling intervals.

Highlights

  • FM-approved safety for regulated refuelling
  • Self-priming rotary action starts flow instantly
  • Vacuum release prevents pressure build-up during use
  • 8 ft anti-static hose with non-sparking nozzle reduces ignition risk
  • Graphite vanes self-lubricate for long, wear-free service

Specifications

BrandAMERICAN FORGE & FOUNDRY
ColorTransparent

Questions about this item

How do I install the 8210 pump and its 8ft anti-static hose, and what step is often missed?

Connect the hose to the pump outlet and the non-sparking nozzle, then prime the self-priming unit by operating the rotary handle until fuel flows; the step often missed is opening the vacuum release before priming so air can escape.

What maintenance will the 8210 pump need over time?

The graphite vanes are self-lubricating and non-wearing, so no routine vane replacement is required; periodically inspect the 8ft anti-static hose and non-sparking nozzle for cracks or wear and replace them if damaged.

What limit appears first when the 8210 pump runs continuously?

Extended operation can heat the pump body and the 8ft anti-static hose; the vacuum release helps manage pressure, but sustained high flow will eventually hit thermal limits before the graphite vanes show wear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.