We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey metal quick-disconnect adapter with grease fitting and 1/8 NPT threads

American Forge & Foundry, Inc.

American Forge & Foundry 8024 Quick Disconnect Adapter 1/8 in NPT Grey

SKU CH-E6EH-0BAHJ

Quick-disconnect adapter with a grease fitting and 1/8 in NPT threads for hand-operated grease guns

  • ColorGrey
  • Quick disconnect speeds up grease-gun changes
  • 1/8" NPT threads fit standard fittings
  • Grey finish resists corrosion in workshop use
  • Designed for hand-operated grease guns only
  • California Proposition 65 chemical warning applies

1/8 NPT Quick Disconnect Adapter

The American Forge & Foundry 8024 connects a hand-operated grease gun to a 1/8 inch NPT fitting. Its quick disconnect design speeds up attachment and removal in confined work areas. The grey finish identifies the adapter in a busy tool tray.

Thermals Noise And Power Draw

This is a passive mechanical adapter with no moving parts, electrical draw or heat generation. Operation adds no audible noise beyond the grease gun itself. No power source or cooling consideration is required.

Build Fit And Clearance

The adapter threads directly onto any 1/8 inch NPT port and accepts standard grease gun couplers. It suits maintenance tasks where straight access is limited and a compact connector is needed. Not intended for powered pumping systems or high-pressure hydraulic lines.

Highlights

  • Quick disconnect speeds up grease-gun changes
  • 1/8" NPT threads fit standard fittings
  • Grey finish resists corrosion in workshop use
  • Designed for hand-operated grease guns only
  • California Proposition 65 chemical warning applies

Specifications

ColorGrey
BrandAMERICAN FORGE & FOUNDRY

Questions about this item

How do I install the 8024 quick-disconnect adapter onto a 1/8" NPT port without cross-threading?

Start the 1/8" NPT threads by hand, turning clockwise until snug, then finish with a wrench — forcing it with the wrench from the start is the step that strips the taper.

What maintenance does the 8024 adapter need after repeated grease-gun cycles?

Wipe the quick-disconnect sleeve clean, check the ball-lock for grit, and apply a drop of light oil to the release mechanism if it feels stiff.

What limit appears first when the 8024 adapter sees sustained use on a hand-operated grease gun?

The quick-disconnect sleeve wears and loses its positive lock before the 1/8" NPT threads show any measurable deformation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.