We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rack-mount power supply with sixteen front outlets and illuminated breaker

ALTRONIX

ALTRONIX R2416600UL 16-outlet 24V/28VAC rack power supply

SKU CH-BKZQ-F5DER MPN R2416600UL

Rack-mountable unit delivers 24 V AC at 25 A or 28 V AC at 20 A across sixteen PTC-protected outputs with surge suppression and illuminated circuit breaker

  • TypeBattery
  • 16 PTC-protected outputs each rated at 3.5 amp for reliable load distribution
  • Selectable 24 V AC at 25 amp or 28 V AC at 20 amp to match system needs
  • Class 2 power-limited outputs meet safety requirements for access and surveillance gear
  • Illuminated circuit breaker with manual reset enables quick power restoration
  • Surge suppression and camera-sync support protect connected devices and maintain timing

16-Outlet Rack Power Supply

The ALTRONIX R2416600UL delivers 24VAC or 28VAC power across sixteen PTC-protected outputs. It suits security installers and facility managers who need to run multiple cameras or access-control devices from a single rack-mountable unit. Each output is rated at 3.5 amps and the supply is Class 2 power limited. The unit also maintains camera synchronization across connected loads.

Sustained Load Behaviour

The supply provides 25 amps at 24VAC (600VA) or 20 amps at 28VAC (560VA) continuously. Surge suppression protects connected equipment during transients while the PTCs on every output limit fault current without requiring fuse replacement. An illuminated circuit breaker with manual reset disconnects the AC input if the total draw exceeds the rated capacity. The AC power LED gives immediate visual confirmation that mains power is present.

Installation Notes

The unit mounts in a standard rack and accepts 115VAC at 50 or 60Hz with a 6 amp input draw at 110V. Wiring sixteen individual output circuits takes time and careful labelling to avoid crossed pairs. The manual-reset breaker must be accessible after installation so it can be cycled if an overload trips it. Installers should verify that the aggregate load stays within the 600VA or 560VA limit for the selected output voltage.

Highlights

  • 16 PTC-protected outputs each rated at 3.5 amp for reliable load distribution
  • Selectable 24 V AC at 25 amp or 28 V AC at 20 amp to match system needs
  • Class 2 power-limited outputs meet safety requirements for access and surveillance gear
  • Illuminated circuit breaker with manual reset enables quick power restoration
  • Surge suppression and camera-sync support protect connected devices and maintain timing

Specifications

TypeBattery

Questions about this item

How much heat and power draw should I expect when the R2416600UL runs continuously at full 600 VA load?

The unit draws 6 A at 115 V AC input while delivering up to 25 A at 24 V AC or 20 A at 28 V AC; Class 2 power-limited outputs and surge suppression limit excess dissipation.

What existing infrastructure must I already have to install and operate this 16-outlet supply?

A 115 V AC 50/60 Hz source on a 6 A circuit feeds the illuminated disconnect breaker; each of the sixteen PTC-protected outputs accepts low-voltage cable for 24 V or 28 V AC devices.

Will the R2416600UL keep older 24 V AC cameras in sync alongside newer 28 V AC access-control gear on the same rack?

Yes — the supply maintains camera synchronisation across all sixteen outputs, and each PTC is rated at 3.5 A so mixed 24 V and 28 V loads share the 600 VA or 560 VA budget safely.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.