ALTRONIX
ALTRONIX AL600ULM Industrial Power Supply 120V AC 12/24V DC Wall Mount
Converts 120 V AC input into five protected 12 V DC or 24 V DC outputs for access control hardware
- Engine BrandAltronix
- Converts 120 V AC to 12 V and 24 V DC for access control devices
- Five individually protected Class 2 power-limited outputs serve mag locks, strikes and door holders
- Outputs operate in both fail-safe and fail-secure modes for flexible security design
- Supervised trigger input accepts NO, NC or FACP polarity reversal signals
- Form C dry relay enables HVAC shutdown, elevator recall or auxiliary device triggering
Purpose-built access power
The ALTRONIX AL600ULM is a wall-mount industrial supply that converts 120 V AC into five independently protected Class 2 outputs selectable at 12 V DC or 24 V DC. It is engineered for access control installations that power mag locks, electric strikes and magnetic door holders in both fail-safe and fail-secure configurations.
Trigger and relay integration
A supervised normally open or normally closed input accepts direct triggers or polarity reversal from a fire alarm control panel. The built-in form C dry relay provides a contact for HVAC shutdown, elevator recall or auxiliary device activation without extra modules.
Straightforward wall installation
The enclosure mounts directly to the wall and accepts 115 V AC at 60 Hz through standard conduit knockouts. Wiring errors typically arise when the five outputs are not individually fused for the connected load or when the trigger polarity does not match the fire panel signal.
Highlights
- Converts 120 V AC to 12 V and 24 V DC for access control devices
- Five individually protected Class 2 power-limited outputs serve mag locks, strikes and door holders
- Outputs operate in both fail-safe and fail-secure modes for flexible security design
- Supervised trigger input accepts NO, NC or FACP polarity reversal signals
- Form C dry relay enables HVAC shutdown, elevator recall or auxiliary device triggering
Specifications
| Engine Brand | Altronix |
|---|
Questions about this item
Will the five Class 2 outputs need fuse replacement after a fault?
Each of the five outputs is individually protected with Class 2 power-limiting circuitry that resets automatically once the fault is cleared, so no fuse changes are required.
What limits continuous 12 V or 24 V delivery when the unit runs all day?
The 600 W total capacity shared across the five outputs is the first ceiling reached under sustained load.
How much heat or fan noise appears during 24-hour operation?
The wall-mount enclosure uses passive convection cooling with no internal fan, so it runs silently and surface temperature stays within the limits set by the Class 2 rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
