We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Altec Lansing

Altec Lansing ALGH9602 Wired Gaming Headset 3.5 mm 50 mm 21 Ω 112 dB

SKU CH-91S6-RBM8Z

Wired gaming headset with 50 mm drivers, 21 Ω impedance, 112 dB sensitivity and a 3.5 mm jack plus RGB backlight

  • ColorBlack
  • Wireless TypeWired
  • 50 mm drivers deliver full-range 20 Hz–20 kHz sound
  • 112 dB sensitivity produces loud, clear audio at low volume
  • 21 Ω impedance suits phones, consoles and PCs alike
  • Flexible 6.0 mm boom mic captures voice at –42 dB sensitivity
  • 5 mm stereo jack with RGB backlight connects instantly

Wired headset with 3.5 mm jack

The Altec Lansing ALGH9602 is a wired gaming headset built around a 3.5 mm stereo connector. It uses 50 mm drivers rated at 21 Ω impedance and 112 dB sensitivity for direct connection to controllers or PC audio ports. The flexible boom microphone measures 6.0 mm by 2.7 mm with a sensitivity of -42 dB and 2.2 kΩ impedance. RGB backlighting runs from the USB power feed included on the cable.

50 mm drivers and 112 dB sensitivity

The 50 mm drivers deliver a frequency response of 20 Hz to 20 kHz at 112 dB sensitivity, providing ample volume headroom for competitive shooters and immersive single-player titles. The 21 Ω load is easily driven by standard controller jacks or onboard audio without a dedicated amplifier. The microphone captures clear voice chat at -42 dB sensitivity but lacks active noise-cancelling circuitry, so very loud environments may bleed into comms.

USB-powered RGB on a 3.5 mm analogue chain

A single 3.5 mm plug carries all audio while a parallel USB connector powers the RGB lighting only; no software driver is required for basic stereo operation. The adjustable headband and dual earpieces suit extended sessions, and the inline volume control lets you adjust levels without leaving the game. Builds without a free USB port lose the lighting but retain full audio and microphone function.

Highlights

  • 50 mm drivers deliver full-range 20 Hz–20 kHz sound
  • 112 dB sensitivity produces loud, clear audio at low volume
  • 21 Ω impedance suits phones, consoles and PCs alike
  • Flexible 6.0 mm boom mic captures voice at –42 dB sensitivity
  • 5 mm stereo jack with RGB backlight connects instantly

Specifications

BrandALTEC LANSING
SeriesALGH9602
ModelALGH9602/3.5
Part NumberVH9602BLL72001145
ColorBlack
Wireless TypeWired

Questions about this item

Will the 3.5 mm connector work with my older controller that only has a single audio port?

Yes, the 3.5 mm stereo jack carries both audio and microphone signals through one port, so it plugs directly into older controllers or laptops with a combined headset socket.

How can I confirm the 50 mm drivers are delivering the rated 112 dB output after I plug it in?

Play a familiar track at maximum system volume; the high sensitivity means loud, clear sound should arrive well before the slider reaches the top, confirming the drivers are performing to spec.

Does the box include a USB adapter for the RGB lighting or must I buy one separately?

The headset draws RGB power from the USB plug on its cable, so no extra adapter is needed; everything required for audio, microphone and lighting is attached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.