We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White weatherproof outdoor access point, rounded rectangular shape, IP68 rated

Alta Labs

Alta Labs AP6-PRO Outdoor access point

SKU CH-FWVQ-Y42MJ

IP68-rated outdoor WiFi 6 access point delivering 6.3 Gbps combined throughput with 4×4 MU-MIMO, operating from -40 to 70 °C

  • ColorWhite
  • Standards801.11a/b/g/n/ac/ax, WiFi4/WiFi5/WiFi6
  • Wireless Data Rates2.4 GHz: Up to 573 Mbps, 5 GHz: Up to 5.8 Gbps
  • SecurityWPA2-PSK, WPA2-SAE, WPA-Enterprise (WPA2/WPA3)
  • InterfaceEthernet, WiFi, Bluetooth
  • BluetoothYes
  • IP68 rated for dust and water protection in harsh outdoor conditions
  • Operates from -40 to 70°C for reliable performance in extreme temperatures
  • Combined 6.3 Gbps wireless capacity with 4096 QAM modulation
  • 4x4 MU-MIMO on 5 GHz delivers over 30% higher throughput than 2x2 APs
  • Seamless roaming via 802.11 k, v, r and mesh connectivity for uninterrupted coverage

Outdoor WiFi 6 access point

The Alta Labs AP6-PRO Outdoor is an IP68-rated wireless access point built for permanent outdoor deployment. It operates reliably from -40 to 70 °C and delivers a combined 6.3 Gbps across dual bands. The unit targets installers who need enterprise-grade coverage in exposed locations such as campuses, yards or industrial sites.

PoE+ powered, wall or pole mount

A single Ethernet cable supplies both data and up to 25 W via PoE+, so no separate mains feed is required at the mounting point. The white enclosure measures 8.3" x 5.9" x 3.5" and weighs 1.9 lb, allowing straightforward attachment to walls or poles. Bluetooth is included for initial setup, while VLAN tagging (802.1Q) keeps traffic segmented across the wired backbone.

WiFi 6 platform with 4096 QAM

The Qualcomm six-stream platform uses 4×4 MU-MIMO on 5 GHz and 2×2 on 2.4 GHz, reaching 5.8 Gbps and 573 Mbps respectively. 4096 QAM modulation — a feature associated with WiFi 7 — boosts spectral efficiency, yet the radio remains a WiFi 6 device. Clients without WiFi 6 or 4096 QAM support will not attain the headline rates, and the 25 W ceiling limits deployment to PoE+ switches or injectors.

Highlights

  • IP68 rated for dust and water protection in harsh outdoor conditions
  • Operates from -40 to 70°C for reliable performance in extreme temperatures
  • Combined 6.3 Gbps wireless capacity with 4096 QAM modulation
  • 4x4 MU-MIMO on 5 GHz delivers over 30% higher throughput than 2x2 APs
  • Seamless roaming via 802.11 k, v, r and mesh connectivity for uninterrupted coverage

Specifications

BrandAlta Labs
ModelAP6-PRO Outdoor
Part NumberAP6-PRO Outdoor
ColorWhite
Standards801.11a/b/g/n/ac/ax, WiFi4/WiFi5/WiFi6
Wireless Data Rates2.4 GHz: Up to 573 Mbps, 5 GHz: Up to 5.8 Gbps
SecurityWPA2-PSK, WPA2-SAE, WPA-Enterprise (WPA2/WPA3)
InterfaceEthernet, WiFi, Bluetooth
BluetoothYes
MIMO5 GHz: 4 x 4, DL/UL MU-MIMO, DL/UL MU-OFDMA
2.4 GHz: 2 x 2. DL/UL MU-OFDMA
Explicit TX beam-forming
VLAN802.1Q
Power SupplyPOE+
Max Power Consumption25W Max, 7 - 15W Typical @ 23° C (73° F)
Dimensions8.3" x 5.9" x 3.5"
Weight1.9lb

Questions about this item

What Ethernet standard does the AP6-PRO Outdoor use, and what is its practical throughput cap?

The AP6-PRO Outdoor connects via a single Ethernet port powered by PoE+ and delivers a combined wireless capacity of up to 6.3 Gbps, with 5 GHz reaching 5.8 Gbps and 2.4 GHz up to 573 Mbps.

What are the physical dimensions and mounting requirements for the AP6-PRO Outdoor?

The unit measures 8.3" x 5.9" x 3.5" and weighs 1.9 lb; its IP68-rated enclosure operates from -40 to 70°C, so it mounts on any pole or wall that can support its weight in those conditions.

How is the AP6-PRO Outdoor installed, and which step is most often missed?

Connect the AP to a PoE+ switch or injector supplying up to 25 W, then adopt it in the Alta mobile app or Alta Cloud; the step most often missed is configuring VLAN 802.1Q tags before the first client connects.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.