We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact dual-bay M.2 NVMe cloner dock with USB-C port and clone button

ALSEYE

ALSEYE M.2 NVMe Cloner Dock 10Gbps Dual-Bay 2 in 1 accessory

SKU CH-MRD4-93GZB

Dual-bay M.2 NVMe dock clones drives offline at 10 Gbps and fits 2230 to 22110 sizes up to 2×8 TB

  • Offline cloning works without a computer
  • 10 Gbps USB 3.2 Gen 2x2 transfer speed
  • Dual bays accept 2230, 2242, 2260, 2280, 22110 NVMe SSDs
  • Supports M Key and B+M Key NVMe drives up to 2x8 TB
  • Tool-free, driver-free installation with included 5 V/3 A power adapter

10Gbps NVMe Cloner Dock

The ALSEYE M.2 NVMe Cloner Dock is a dual-bay enclosure that lets users duplicate or access PCIe SSDs over a USB 3.2 Gen 2x2 link rated at 10Gbps. It targets technicians and power users who need fast offline cloning or portable high-speed storage without installing drives inside a chassis. The unit accepts M-key and B+M-key NVMe modules in 2230, 2242, 2260, 2280 and 22110 lengths, with each bay supporting up to 8TB. It is not compatible with M.2 SATA drives.

Tool-free installation with offline clone

Drives slide into the open bays without screws or trays, and no driver is required on the host computer. For offline cloning, insert the source and target SSDs, attach the included 5V/3A power adapter, power the unit on, then hold the clone button for five seconds until the 25% LED flashes blue. The source capacity must not exceed the target capacity, and the dock must not be connected to a computer during the operation. AHCI SSDs can be used in the source slot only with a separate AHCI-to-M.2 adapter.

Check drive keys and host port before ordering

Verify that both SSDs use the NVMe protocol and have an M-key or B+M-key edge connector; SATA-based M.2 modules will not work. Confirm the host system provides a USB 3.2 Gen 2x2 or compatible port to reach the advertised 10Gbps throughput; slower ports will reduce transfer speed. Ensure the target drive is equal to or larger than the source drive, and keep the 5V/3A power adapter connected for all operations.

Highlights

  • Offline cloning works without a computer
  • 10 Gbps USB 3.2 Gen 2x2 transfer speed
  • Dual bays accept 2230, 2242, 2260, 2280, 22110 NVMe SSDs
  • Supports M Key and B+M Key NVMe drives up to 2x8 TB
  • Tool-free, driver-free installation with included 5 V/3 A power adapter

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the offline clone finished correctly?

After pressing the clone button for five seconds, watch the 25 % LED — steady blue means the clone completed; flashing blue means it is still running.

What comes in the box and what must I supply myself?

The dock, a 5 V / 3 A power adapter and a USB 3.2 Gen 2x2 cable are included; you must provide two M-key or B+M-key NVMe SSDs in 2230, 2242, 2260, 2280 or 22110 form factors.

Which SSD size should I choose for the target drive when cloning?

Pick a target NVMe SSD whose capacity is equal to or larger than the source drive — the dock supports up to 8 TB per bay and accepts 2230 through 22110 lengths.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.