We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper M.2 2280 SSD heatsink with two heat pipes and thermal film

ALSEYE

ALSEYE M.2 2280 SSD Heatsink Copper 2 Heat Pipes 2 in 1 Accessory

SKU CH-0QT6-1GN8N

Copper heatsink with two heat pipes and thermal film cools M.2 2280 SSDs to maintain performance

  • Copper construction draws heat away from the drive
  • Two heat pipes transfer thermal energy faster
  • Thermal film, straps and rubber bands included for simple fitting
  • Designed specifically for M.2 2280 solid-state drives
  • Lower operating temperatures help maintain consistent SSD performance

M.2 2280 SSD cooler for thermal management

This copper heatsink fits M.2 2280 solid-state drives and uses two heat pipes to draw heat away from the controller and memory. It targets builders who want to prevent thermal throttling during sustained workloads. The kit includes thermal film, straps and rubber bands for securing the assembly. It is not for drives in other form factors or for systems without physical clearance for the added height.

Bundled thermal film straps

The thermal film replaces separate paste and ensures even contact between drive and copper base. Four straps and four rubber bands hold the heatsink firmly without tools or adhesives. Everything needed for installation arrives in the package so no extra purchases are required. The accessories do not add active cooling or change the drive electrical interface.

Tool-free installation

The heatsink sits on the drive and the straps wrap around the assembly while rubber bands keep tension. Most fits are straightforward but over-tightening can bow the PCB or damage the connector. Clearance above the motherboard slot must be checked before fitting because the copper block adds height. No software or firmware steps are involved.

Highlights

  • Copper construction draws heat away from the drive
  • Two heat pipes transfer thermal energy faster
  • Thermal film, straps and rubber bands included for simple fitting
  • Designed specifically for M.2 2280 solid-state drives
  • Lower operating temperatures help maintain consistent SSD performance

Specifications

No published specifications for this item yet.

Questions about this item

Does the copper heatsink or its thermal film need periodic replacement?

The copper heatsink itself is a passive metal part that does not wear out; only the included thermal film may need replacing if it dries out or loses adhesion after extended use.

What thermal limit appears first when an M.2 2280 SSD runs under sustained load with this cooler?

The drive’s own controller throttling temperature is reached before the copper and dual heat pipes saturate, so throttling remains the first limit.

How much extra noise, heat or power does the heatsink add when the SSD runs all day?

It adds zero noise and zero power draw because it has no fan or electronics; it simply spreads the drive’s existing heat into the copper and heat pipes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.