We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
ALSEYE ELPLP89 V13H010L89 250W DLP replacement lamp with housing

ALSEYE

ALSEYE ELPLP89 V13H010L89 250W DLP Replacement Lamp

SKU CH-FYB1-B55Y6

A 250W DLP replacement lamp with housing rated for 3500-5000 hours, compatible with Epson Home Cinema and Pro Cinema projectors

  • Delivers 250 W brightness for vivid projection
  • Lasts 3500–5000 hours before replacement needed
  • Fits Epson Home Cinema 5040UB 5050UB 6040UB models
  • Ready to install with housing included
  • New condition ensures full rated performance

ALSEYE ELPLP89 250W DLP Replacement Lamp

This ALSEYE ELPLP89 replacement lamp delivers 250W of power for compatible Epson Home Cinema and Pro Cinema projectors. It fits models including the 5040UB, 5050UB, 6040UB, 4010, 4050, and 6050UB series. The unit ships new with a genuine bulb inside a housing, ready for installation. It is not suited for projectors outside the listed Epson series or for users needing a bare bulb without housing.

Tool-free housing swap in minutes

Installation requires only a screwdriver to remove the lamp cover, unplug the old module, and seat the new housing. The supplier notes the process takes a few minutes and no technician is needed. Common issues arise if the projector is not fully cooled or unplugged before starting, or if the connector is not seated firmly. The lamp cover screw must be retightened to avoid interlock errors.

3500 to 5000 hour rated lifespan

The lamp is rated for 3500 to 5000 hours of average use under normal operating conditions. Brightness and colour stability are maintained across the rated period when the projector’s cooling system functions correctly. Extended sessions at high brightness may reduce total hours compared to eco-mode operation. Dust buildup in filters can raise internal temperatures and shorten practical lamp life.

Highlights

  • Delivers 250 W brightness for vivid projection
  • Lasts 3500–5000 hours before replacement needed
  • Fits Epson Home Cinema 5040UB 5050UB 6040UB models
  • Ready to install with housing included
  • New condition ensures full rated performance

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the ELPLP89 lamp is working correctly after installing it in my Home Cinema 5050UB?

Power on the projector and verify a bright, stable image appears; the on-screen lamp timer should reset to zero and show no warning icons, indicating the 250 W module is recognised and operating normally.

What comes in the package and is anything else required for the V13H010L89 replacement?

The box contains one 250 W bare lamp with housing ready to fit; no extra cables, filters or tools are supplied or needed for the swap.

Which ELPLP89 version should I choose for a Pro Cinema 6050UB versus a Home Cinema 4010?

The same ELPLP89 / V13H010L89 250 W lamp with housing fits both the Pro Cinema 6050UB and the Home Cinema 4010, so a single version covers all listed models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.