We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black metal receiver box with HDMI and Ethernet ports

ALSEYE

ALSEYE 2 in 1 accessory HDMI over IP receiver 150m 1080p 60Hz

SKU CH-71QR-RFXEG

Receives 1080p 60Hz HDMI signals up to 150m over cat5e/6, supports one-to-many with 253 receivers, IR control and 3.5mm audio extraction

  • Receives 1080p 60Hz video up to 150 metres over cat5e/6 cable
  • One transmitter supports up to 253 receivers for scalable display networks
  • Extracts PCM 2CH stereo audio via 3.5 mm jack on receiver
  • IR pass-through at 2060KHz enables remote source control from display location
  • Driver-free setup with rugged metal housing and ESD protection

HDMI over IP receiver 150m

This ALSEYE receiver extends a 1080p 60Hz HDMI signal up to 150 metres over cat5e or cat6 cable. It is designed for installers who need to place displays far from the source in digital-signage, classroom or remote-workstation deployments.

Thermals noise and power draw

The unit uses a rugged metal housing with ESD protection that passively dissipates heat without any fan. Operation is therefore silent and power consumption remains low enough for standard PoE or the supplied adapter in typical installations.

One-to-many scaling limit

A single transmitter can connect to a maximum of 253 receivers over an unmanaged Gigabit switch, defining the largest display network this receiver can join. If your project requires more endpoints, this part will not meet that need.

Highlights

  • Receives 1080p 60Hz video up to 150 metres over cat5e/6 cable
  • One transmitter supports up to 253 receivers for scalable display networks
  • Extracts PCM 2CH stereo audio via 3.5 mm jack on receiver
  • IR pass-through at 2060KHz enables remote source control from display location
  • Driver-free setup with rugged metal housing and ESD protection

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the ALSEYE HDMI over IP receiver and what step is often missed?

Connect the receiver to a Gigabit network switch with a cat5e or cat6 cable up to 150 metres, link the display via HDMI, and power the unit. The step often missed is ensuring the switch is unmanaged and that the transmitter and receiver share the same VLAN for the 253-device limit to work.

What maintenance or replacement will the ALSEYE receiver need over time?

The rugged metal housing with ESD protection needs no scheduled maintenance. If the 3.5 mm audio jack or IR sensor (2060KHz) suffers physical damage, only the affected receiver must be replaced; the transmitter and other receivers in the 253-unit chain continue operating.

What limit appears first when the ALSEYE receiver runs continuously at full load?

The 1080p 60Hz video ceiling and the 150 metre cat5e/6 distance cap are the first hard limits; exceeding either drops the signal. Network bandwidth on a Gigabit switch and the 253-receiver maximum are higher thresholds that rarely bind before the resolution or distance limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.