ALSEYE
ALSEYE 2 in 1 accessory carbon fiber tripod 75 inches 13.2lb fluid head 360 panning 90 tilt 25.2 folded
Carbon fibre tripod kit extends to 75 inches, folds to 25.2 inches, and supports 13.2 lb with a fluid head offering 360° panning and 90° tilt
- Lightweight carbon-fibre build folds to 25.2 inches
- Supports 13.2 lb load for DSLR rigs and camcorders
- Fluid head delivers 360° panning and 90° tilt range
- Quick-release plate with 1/4″ and 3/8″ screws plus built-in Allen wrench
- Converts to monopod via 180° folding legs and detachable column
Carbon fibre tripod kit
This carbon fibre tripod kit extends to 75 inches and folds to 25.2 inches for transport. The four-section legs support up to 13.2 lb of equipment. A fluid head provides 360-degree panning and tilt from +90 to -50 degrees. The flat base uses a standard 3/8-inch thread for wide compatibility.
Video creators needing smooth motion
The fluid head suits operators who want steady pan and tilt movement for video work. Photographers requiring only static framing may not need the fluid mechanism. The kit converts to a monopod by combining the centre column with a detachable leg, useful for mobile shooting. Users who never need monopod functionality gain no benefit from the conversion feature.
Handles DSLR rigs and cinema cameras
The 13.2 lb capacity accommodates typical DSLR rigs, compact camcorders and digital cinema cameras. Heavier cinema packages or large telephoto rigs will exceed the load limit. The reversible centre column allows low-angle and macro positioning. The quick-release system accepts the included plate or optional RS-series plates for rapid camera changes.
Highlights
- Lightweight carbon-fibre build folds to 25.2 inches
- Supports 13.2 lb load for DSLR rigs and camcorders
- Fluid head delivers 360° panning and 90° tilt range
- Quick-release plate with 1/4″ and 3/8″ screws plus built-in Allen wrench
- Converts to monopod via 180° folding legs and detachable column
Specifications
No published specifications for this item yet.
Questions about this item
Which camera mounting screw does the included quick-release plate use?
The supplied Standard QR plate provides both 1/4" and 3/8" camera mounting screws for direct attachment.
Can the fluid head be mounted on my existing slider that has a 3/8" thread?
Yes, the flat base mount uses a standard 3/8" thread compatible with most tripods, sliders, jibs or cranes.
How do I verify the pan movement covers the full 360 degrees after assembly?
Unlock the pan knob and rotate the head; it should turn continuously through 360° without hard stops.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
