ALSEYE
ALSEYE 2 in 1 accessory 13.3" FHD 30-pin LCD replacement screen
13.3 inch IPS replacement panel delivers FHD 1920x1080 resolution through a 30-pin connector
- 3 inch FHD IPS panel delivers crisp 1920 x 1080 visuals
- 30 pin bottom right connector fits Dell 9X6HV part numbers
- ISO 13406 compliance allows only 3 to 5 dead pixels
- 100 percent factory tested for reliable out of box operation
- 15 years supplier experience across 80 countries ensures stable quality
Replacement LCD for 2-in-1 laptops
This 13.3 inch IPS panel delivers FHD 1920x1080 resolution through a 30-pin connector located on the bottom right side. It is a non-touch screen supplied without mounting brackets. The unit is designed as a direct replacement for compatible Dell models including DP/N 9X6HV 09X6HV O9X6HV.
Swaps a cracked or dim original panel
The screen replaces a damaged 13.3 inch FHD display in supported 2-in-1 devices. The jump is worth it when the existing glass is broken, backlight has failed or dead pixels exceed the ISO 13406 tolerance of under 3-5 defects. Compatibility must be verified against the original screen model, backlight type, size, connector and resolution before purchase.
Straightforward panel swap for experienced users
Installation requires disassembling the display assembly and disconnecting the 30-pin cable. No brackets are included so original hardware must be reused. What usually goes wrong is mismatched connector orientation, forgotten cable routing or ordering the wrong variant without checking the exact part number on the original screen.
Highlights
- 3 inch FHD IPS panel delivers crisp 1920 x 1080 visuals
- 30 pin bottom right connector fits Dell 9X6HV part numbers
- ISO 13406 compliance allows only 3 to 5 dead pixels
- 100 percent factory tested for reliable out of box operation
- 15 years supplier experience across 80 countries ensures stable quality
Specifications
No published specifications for this item yet.
Questions about this item
Will the 13.3 inch 30-pin connector fit my Dell 9X6HV panel?
The screen uses a 30-pin bottom-right connector and matches Dell DP/N 9X6HV 09X6HV O9X6HV part numbers for direct fit.
How do I install this non-touch LCD without brackets?
Remove the old panel, connect the 30-pin cable firmly at the bottom right, secure the panel in the chassis, then test before final assembly.
What pixel quality can I expect over time under ISO 13406?
The panel is 100% tested to ISO 13406 and ships with fewer than 3-5 dead pixels, so long-term defects should stay within that limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



