We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White insulated copper-clad aluminum wire on spool, 12AWG 75FT

ALSEYE

ALSEYE 2 in 1 Accessory 12AWG 75FT White

SKU CH-DKM1-3CBGM

12 AWG copper-clad aluminium wire with soft-touch jacket, 75 ft roll for automotive and indoor power or ground connections

  • Reliable power delivery for amplifiers and subwoofers using 12AWG copper-clad aluminium conductors
  • Safe handling on job sites with fully insulated soft-touch jacket on each wire
  • Flexible routing in tight spaces thanks to durable yet pliable jacket material
  • Faster, error-free connections via colour-coded ground wire identification
  • Extended reach across vehicle or workshop installations with 75FT continuous length

12 AWG 75 ft power and ground wire

This 12 AWG, 75 ft wire set serves automotive and general electrical installations. It is intended for installers who need a single length for amplifiers, subwoofers, lighting or inverter connections. The copper-clad aluminium conductors suit power and ground duties in vehicles, workshops or marine settings. It is not for buyers who require pure copper conductors or a multi-pack assortment.

Soft-touch insulated jacket and colour coding

Each conductor is wrapped in a fully insulated, soft-touch jacket that remains flexible in tight corners under the hood or on build sites. The durable sheath resists abrasion while staying pliable for routing through sharp bends. Colour-coded insulation identifies the ground wire at a glance, reducing wiring errors during installation. The single-piece package contains one continuous length rather than pre-cut leads.

Copper-clad aluminium conductor limits

Copper-clad aluminium carries less current than an equivalent gauge of solid copper, so voltage drop over the full 75 ft run must be checked against the load. The material is unsuitable for applications that specify pure copper conductors or demand the highest ampacity for the gauge. Installers should verify local code requirements for the intended circuit before committing to this wire type.

Highlights

  • Reliable power delivery for amplifiers and subwoofers using 12AWG copper-clad aluminium conductors
  • Safe handling on job sites with fully insulated soft-touch jacket on each wire
  • Flexible routing in tight spaces thanks to durable yet pliable jacket material
  • Faster, error-free connections via colour-coded ground wire identification
  • Extended reach across vehicle or workshop installations with 75FT continuous length

Specifications

No published specifications for this item yet.

Questions about this item

What gauge is the 12AWG wire and what current can it handle in practice?

The 12AWG copper-clad aluminium conductors are rated for typical automotive amplifier and subwoofer power feeds; actual safe current depends on length, temperature and fuse protection chosen by the installer.

What physical space does the 75FT roll need for routing and mounting?

The soft-touch jacket stays flexible in tight corners under the hood or behind panels, so the three-conductor cable can be tucked along existing loom routes without requiring large clearance holes.

How do I install the colour-coded conductors and what step is often missed?

Match each coloured insulation to the correct terminal — positive, negative and ground — then secure every connection with proper crimp lugs; the step most often skipped is verifying continuity and insulation integrity before powering the system.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.