We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow OM3 fibre trunk cable with MPO connectors at both ends

ALSEYE

ALSEYE 2 in 1 accessory 12 Fiber OM3 MPO to MPO Type-B

SKU CH-2B2P-VMCG1

12-fibre OM3 trunk cable with low-loss MPO connectors, Type-B polarity, and plenum-rated jacket for 10 GbE up to 300 m and 40/100 GbE up to 100 m

  • Low-loss links with 0.20 dB typical insertion loss
  • Type-B polarity (key up to key up) for correct fibre mapping
  • OM3 Corning ClearCurve fibre supports 100 m at 40/100G
  • UL-certified plenum jacket meets fire-safety standards
  • 5 mm bend radius eases routing in tight spaces

12-fibre OM3 trunk cable for high-density links

This 100-foot multimode trunk cable uses Corning ClearCurve OM3 fibre with 12 fibres in a single jacket. Non-pinned MPO connectors on both ends follow Type-B polarity for key-up-to-key-up alignment. The plenum-rated OFNP jacket meets fire-retardant requirements for in-building runs.

Verify MPO polarity and connector gender before

Ensure your patch panels, cassettes or transceivers accept non-pinned MPO interfaces and require Type-B key-up-to-key-up mapping. The cable operates at 850 nm and 1300 nm with a 7.5 mm minimum bend radius, so confirm pathway clearance and bend-radius limits in your installation. Compliance marks include UL, CE, IEC, TIA and RoHS.

Pre-terminated ends and snap-in clips simplify

Factory-terminated connectors are tested to 0.20 dB typical and 0.35 dB maximum insertion loss with 20 dB return loss. Snap-in strain-relief clips aid cable management in dense racks. The lightweight 3.0 mm jacket reduces bundle weight while supporting 10 GbE to 300 m and 40/100 GbE to 100 m at 850 nm.

Highlights

  • Low-loss links with 0.20 dB typical insertion loss
  • Type-B polarity (key up to key up) for correct fibre mapping
  • OM3 Corning ClearCurve fibre supports 100 m at 40/100G
  • UL-certified plenum jacket meets fire-safety standards
  • 5 mm bend radius eases routing in tight spaces

Specifications

No published specifications for this item yet.

Questions about this item

Does the 12-fiber MPO trunk cable arrive pre-terminated and ready to install, or must I field-terminate the connectors?

The cable ships pre-terminated with non-pinned MPO connectors on both ends and includes snap-in strain-relief clips, so it is ready for immediate deployment.

When should I choose this Type-B OM3 cable instead of a Type-A or single-mode version?

Choose this Type-B (key-up to key-up) OM3 multimode cable when your link requires 10 GbE up to 300 m or 40/100 GbE up to 100 m at 850 nm and the patch-panel polarity map calls for Type-B.

What does the 0.35 dB maximum insertion loss mean for a live 40 GbE link at 100 metres?

At 850 nm the cable meets a 0.35 dB max insertion loss, leaving ample margin within the 40/100 GbE 100 m channel budget for connectors and patch cords.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.