ALSEYE
ALSEYE 13.3" FHD 30-Pin LCD Screen Replacement
A 13.3" FHD IPS LCD panel with a 30-pin connector for compatible Lenovo 2-in-1 laptops
- FHD 1920x1080 resolution delivers sharp detail on 13.3 inch panel
- 30-pin bottom-right connector matches Lenovo FRU 02HL711 and PN SD10T83313
- ISO compliant quality control allows fewer than five dead pixels
- Non-touch IPS panel suits replacement without e-Privacy filter
- Supplied new without brackets for direct panel swap
13.3" FHD LCD Replacement Screen
This 13.3 inch IPS panel delivers a 1920x1080 resolution through a 30-pin connector located on the bottom right side. It is a non-touch display supplied without mounting brackets. The screen meets ISO standards allowing up to 3-5 dead pixels. Outline dimensions or exact model markings may vary slightly depending on stock.
For Lenovo Laptops Requiring PN SD10T83313
This part suits owners repairing a compatible Lenovo device where the original screen matches the 30-pin FHD specification. It is not for laptops using a different pin count, a touch-enabled digitiser, or an e-Privacy panel. Buyers needing brackets or a specific bezel outline should verify fitment before ordering.
30-Pin Bottom Right Connector
The single specification that decides compatibility is the 30-pin connector position on the bottom right edge. Your original screen must use this exact interface and layout. A different pin count or connector location will prevent installation. Confirm the part numbers SD10T83313 or 02HL711 match your service manual.
Highlights
- FHD 1920x1080 resolution delivers sharp detail on 13.3 inch panel
- 30-pin bottom-right connector matches Lenovo FRU 02HL711 and PN SD10T83313
- ISO compliant quality control allows fewer than five dead pixels
- Non-touch IPS panel suits replacement without e-Privacy filter
- Supplied new without brackets for direct panel swap
Specifications
No published specifications for this item yet.
Questions about this item
Does the 13.3" FHD panel generate noticeable heat or fan noise during extended use?
The LCD screen itself is a passive component and produces no heat or noise; any warmth or sound comes from the laptop's own backlight and cooling system.
Which existing laptop parts must I already have to install this 30-pin display?
You need a compatible 30-pin eDP cable routed to the bottom-right connector, the original hinge brackets or mounting screws, and a chassis designed for a 13.3" 1920x1080 non-touch panel.
Will this replacement screen work with the original Lenovo FRU 02HL711 backlight inverter and ambient-light sensor?
The panel uses a standard 30-pin eDP interface matching Lenovo PN SD10T83313, so it connects directly to the existing video cable; backlight control and sensor functions are handled by the laptop's mainboard, not the screen itself.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



