ALSEYE
ALSEYE 12V 8A 96W power adapter 5.5mm x 2.5mm barrel plug
Delivers 12 V at up to 8 A (96 W max) from 100-240 V AC with a 5.5 mm × 2.5 mm barrel plug and multiple safety protections
- Delivers up to 96 W for LED strips and CCTV
- Accepts 100-240 V AC input for worldwide use
- 5 mm × 2.5 mm barrel plug fits common 12 V devices
- 86-inch cable gives flexible placement indoors
- Multiple protection circuits guard against short circuits and over-voltage
12V 8A 96W desktop adapter
This 12-volt desktop adapter delivers up to 8 amps for a maximum of 96 watts from a 100-240 volt AC source. It targets installers and hobbyists who need a single regulated supply for indoor LED strips, CCTV cameras or similar 12V loads. The unit ships with a detachable AC cord and a 24-month coverage period.
8-amp headroom for strips and cameras
The supply comfortably runs 12-volt devices drawing less than 8 amps, including typical 5050 and 2835 LED modules rated at 3.5, 4.5, 5.5, 6.5 or 7.5 amps. It reaches its limit at 96 watts, so any load above 8 amps will trigger the over-current cut-off and shut the unit down. Indoor use only is specified by the manufacturer.
5.5 x 2.5 mm barrel cord and AC lead
An 86-inch output cable terminates in a 5.5 mm by 2.5 mm barrel plug with centre-positive polarity that also fits 5.5 mm by 2.1 mm jacks. The bundled AC input cord lets you connect the adapter to any standard mains socket without sourcing a separate lead. No additional software or configuration is required.
Highlights
- Delivers up to 96 W for LED strips and CCTV
- Accepts 100-240 V AC input for worldwide use
- 5 mm × 2.5 mm barrel plug fits common 12 V devices
- 86-inch cable gives flexible placement indoors
- Multiple protection circuits guard against short circuits and over-voltage
Specifications
No published specifications for this item yet.
Questions about this item
Will this 12V 8A adapter run my existing 5050 LED strips that draw 6A?
Yes, it delivers up to 8A at 12V, so any 12V load drawing 6A or less will operate within its 96W limit.
How can I confirm the 5.5mm x 2.5mm barrel plug is making a solid connection after I plug it in?
The adapter includes multiple protections — over-temperature, short-circuit, under-voltage, over-voltage and over-current cut-offs — so if the LED strip lights steadily without flickering, the link is good.
Does the box include both the AC mains cord and the DC output lead, or do I need to buy a cable separately?
The package contains the 12V 8A adapter and one AC input power cord; the 86-inch DC cable with the 5.5mm x 2.5mm barrel plug is already attached to the adapter.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



