Alpine
Alpine SXE-1726S 6.5" Coax Speakers & PWE-S8 Powered Subwoofer
A 6.5" coaxial speaker pair rated at 40 W RMS plus an 8" powered subwoofer with 120 W output and a 3-inch depth
- TypeAmplifier
- Premium 6.5" coaxial sound with 40 W RMS clarity
- 220 W peak power handles dynamic music passages effortlessly
- Wide 60 Hz – 20 kHz frequency range captures full detail
- Compact 8" powered sub adds 120 W of deep bass
- Shallow 3-inch depth fits tight vehicle spaces easily
Bundle Contents
This bundle pairs Alpine SXE-1726S 6.5" 2-way coaxial speakers with an Alpine PWE-S8 compact powered 8" subwoofer. The speakers handle 40 watts RMS and 220 watts peak at 4 ohms. The subwoofer delivers 120 watts from a quad-coil driver in a shallow enclosure. Together they cover a 60Hz-20kHz range for a full-system upgrade.
Installation Fit
The PWE-S8 measures just 3 inches deep, 13.5 inches wide, and 9 inches tall, allowing placement under seats or in tight cargo areas. Its cast metal chassis adds durability without demanding a large enclosure. The subwoofer accepts RCA and auto-sensing speaker-level inputs, so it connects to factory or aftermarket head units without extra converters. The coaxial speakers mount in standard 6.5" locations.
Tuning Controls
Side-panel access on the PWE-S8 provides phase, gain, low-pass crossover, and remote sub-level adjustments. These controls let the installer match bass output to the cabin and balance it with the coaxial pair. The built-in amplifier removes the need for a separate amp rack and wiring kit. The bundle therefore simplifies the signal chain while still offering precise bass shaping.
Highlights
- Premium 6.5" coaxial sound with 40 W RMS clarity
- 220 W peak power handles dynamic music passages effortlessly
- Wide 60 Hz – 20 kHz frequency range captures full detail
- Compact 8" powered sub adds 120 W of deep bass
- Shallow 3-inch depth fits tight vehicle spaces easily
Specifications
| Type | Amplifier |
|---|
Questions about this item
How much RMS power can the SXE-1726S speakers handle continuously?
The Alpine SXE-1726S 6.5" coaxial speakers are rated for 40 watts RMS each, which is the continuous power they can handle without thermal damage.
Does the PWE-S8 subwoofer run hot or draw a lot of current during long drives?
The PWE-S8 has a built-in 120-watt amplifier; its compact cast-metal chassis helps dissipate heat, and the auto-sensing inputs simplify wiring to reduce installation strain.
What head-unit connections are needed to install this bundle?
You need a source with either RCA pre-amp outputs or speaker-level outputs; the PWE-S8 accepts both via its side-panel inputs and includes gain, crossover and remote-level controls.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



