We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular vented enclosure with dual 8-inch subwoofers, mono amplifier, remote bass knob and wiring kit

Alpine

Alpine S-DB8V-TRK dual 8" truck subwoofer bundle with 600 W amp

SKU CH-54DB-V1794

Preloaded dual 8-inch truck subwoofer enclosure paired with a 600 W mono amp, remote bass knob and 4-gauge wiring kit

  • TypeSubwoofers
  • Dual 8" subwoofers deliver 600 W peak power handling
  • Mono amplifier produces 600 W RMS at 2 ohms and 330 W RMS at 4 ohms
  • Remote bass knob enables level control from the driver seat
  • Vented enclosure tuned to 36 Hz for deep low-frequency response
  • 4-gauge copper wiring kit rated for 1200 W completes the installation

Truck-focused subwoofer bundle

This bundle pairs a dual 8-inch vented enclosure with a matching 600-watt mono amplifier, remote bass knob and complete 4-gauge wiring kit. It is designed for truck owners who want deep bass without sacrificing cabin space or building a custom box.

Upgrade from single-driver or under-powered setups

The included enclosure delivers 600 watts power handling tuned to 36 hertz, while the amplifier provides 600 watts RMS at 2 ohms and 330 watts RMS at 4 ohms. The jump is worthwhile when factory audio lacks low-end authority and a compact, pre-matched system is preferred.

Handles bass-heavy music

The system covers 34 to 200 hertz with 84 dB sensitivity, giving strong output down to the tuning point. Headroom runs out below 34 hertz or when sustained demand exceeds the 600-watt continuous rating of the enclosure and amplifier.

Highlights

  • Dual 8" subwoofers deliver 600 W peak power handling
  • Mono amplifier produces 600 W RMS at 2 ohms and 330 W RMS at 4 ohms
  • Remote bass knob enables level control from the driver seat
  • Vented enclosure tuned to 36 Hz for deep low-frequency response
  • 4-gauge copper wiring kit rated for 1200 W completes the installation

Specifications

TypeSubwoofers

Questions about this item

What width clearance does the 40-51 inch truck enclosure need?

The enclosure measures 40-51 inches wide, 8-3/4 inches high and 13-3/4 inches deep, so the mounting area must accommodate that full span.

Which wiring step connects the remote bass knob to the S-A60M amplifier?

Plug the RUX-KNOB.2 cable into the dedicated remote port on the amplifier; skipping this step leaves the subwoofer level fixed at the amp gain setting.

When should the 4-gauge power and ground cables from the Stinger kit be inspected or replaced?

Check the 4-gauge copper wiring annually for corrosion, loose terminals or insulation damage, and replace any section that shows heat discolouration or fraying.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.