We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Alpine iLX-507 7 inch receiver with two 6.5 inch coaxial speakers in bundle

Alpine

Alpine iLX-507 7" Receiver Bundle with 2x SXE-1726S 6.5" Coaxial Speakers

SKU CH-DQVP-FTSKP

A 7-inch multimedia receiver with wireless smartphone integration and built-in HD Radio paired with two 6.5-inch coaxial speakers rated at 40 watts RMS and 220 watts peak

  • TypeRadio
  • Wireless Apple CarPlay and Android Auto for cable-free smartphone integration
  • 7-inch WXGA display at 1280x720 pixels for sharp on-screen detail
  • Built-in amplifier delivers 16 watts RMS and 50 watts peak per channel
  • 13-band parametric EQ with 6-channel time correction for precise sound tuning
  • Two 6.5-inch coaxial speakers rated 40 watts RMS and 220 watts peak power

Bundle contents

This package combines the Alpine iLX-507 7" multimedia receiver with two pairs of Alpine SXE-1726S 6.5" coaxial speakers. The receiver delivers wireless Apple CarPlay and wireless Android Auto connectivity alongside a 7" WXGA display at 1280x720px. It suits drivers who want a single-box upgrade for smartphone integration and speaker replacement. Buyers needing a detachable faceplate or a double-DIN chassis should look elsewhere.

Thermals noise power

The built-in amplifier provides 16W RMS and 50W peak across four channels while the included speakers handle 40W RMS and 220W peak at 4 ohms nominal impedance. The 24-bit DAC and 13-band parametric EQ shape output without adding active cooling requirements. High-pass and low-pass crossovers plus six-channel time correction help keep distortion low at typical listening levels. No fan noise or thermal throttling data is specified.

Build connectors mounting

The receiver fits a single-DIN opening with its shallow 7" touchscreen chassis and includes front and rear camera inputs plus an external microphone. Three pre-outs allow external amplifier expansion while built-in HD Radio handles broadcast reception. Supported media formats cover MP3, WMA, AAC, FLAC, APE, H.264, MPEG-4 AVC, MP4, MOV, FLV, MKV, JPG, PNG and BMP. Installers without steering-wheel control adapters or separate amplifier wiring kits will need additional parts.

Highlights

  • Wireless Apple CarPlay and Android Auto for cable-free smartphone integration
  • 7-inch WXGA display at 1280x720 pixels for sharp on-screen detail
  • Built-in amplifier delivers 16 watts RMS and 50 watts peak per channel
  • 13-band parametric EQ with 6-channel time correction for precise sound tuning
  • Two 6.5-inch coaxial speakers rated 40 watts RMS and 220 watts peak power

Specifications

TypeRadio

Questions about this item

How do I wire the iLX-507's 16W RMS built-in amplifier to the SXE-1726S speakers without overdriving them?

Connect each speaker to its own channel; the 40W RMS speakers handle the 16W RMS per channel cleanly, but keep gain low and set the high-pass crossover near 80 Hz to protect the 6.5" cones.

What upkeep do the SXE-1726S coaxial speakers need after installation?

Check the 4-ohm impedance terminals annually for corrosion, verify the 40W RMS cones move freely, and reseal door panels if moisture appears — no other scheduled maintenance is required.

At what point does the iLX-507's 24-bit DAC hit its thermal limit during long drives?

The 16W RMS x 4 amplifier reaches its thermal ceiling first; sustained high volume triggers protection mode, so allow airflow behind the 7" chassis and avoid continuous peak output.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.