Alpine
Alpine DM-65-G 6.5" coaxial speakers pair with wiring harness
Two pairs of 6.5" coaxial speakers with GM wiring harnesses, 50 W RMS and 92 dB sensitivity
- TypeSubwoofers
- 200 W peak power handles loud transients
- 50 W RMS rating sustains clean output
- 65 Hz – 20 kHz range covers full music spectrum
- 92 dB sensitivity produces high volume with modest power
- Metra 72-4568 harness fits select 1988-up GM vehicles
What this bundle provides
This bundle contains two pairs of Alpine DM-65-G 6.5" coaxial speakers and two Metra 72-4568 wiring harnesses. The harnesses are made for select 1988-up GM vehicles so the speakers connect without cutting factory wires. It suits drivers who want a straightforward stereo upgrade using the original speaker locations.
Power handling and output
Each speaker handles 50W RMS and 200W peak power with a 4Ohm impedance and 92dB sensitivity. The frequency response runs from 65Hz to 20kHz. These figures show the set works well with a factory head unit or a modest amplifier for daily listening.
Build details and mounting
The woofers use an injection-moulded bass diaphragm with a rubber surround. A Tedoron tweeter diaphragm and neodymium magnets handle the high frequencies. Grilles are included to protect the drivers once they are installed in the factory openings.
Highlights
- 200 W peak power handles loud transients
- 50 W RMS rating sustains clean output
- 65 Hz – 20 kHz range covers full music spectrum
- 92 dB sensitivity produces high volume with modest power
- Metra 72-4568 harness fits select 1988-up GM vehicles
Specifications
| Type | Subwoofers |
|---|
Questions about this item
How do I install the Metra 72-4568 harness with the Alpine DM-65-G speakers in a 1988-up GM vehicle?
Plug the Metra 72-4568 harness into the factory connector, then crimp or solder its wires to the speaker terminals; the step often missed is verifying polarity on each channel before tapping the factory wiring.
What maintenance will the Alpine DM-65-G 6.5" coaxial speakers need over time?
The rubber surround and injection-molded bass diaphragm are durable; periodically check the grilles for debris and ensure the wiring harness connections stay tight to maintain the 92dB sensitivity.
At what point does the 50W RMS power limit affect sustained output?
Continuous playback above 50W RMS risks thermal compression on the voice coil; the 200W peak rating only covers short transients, so match amplifier gain to the RMS figure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



