We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black 1.5 inch bullet tweeters with aluminium domes and metal grilles

ALPHASONIK

ALPHASONIK VST150 1.5" Bullet Tweeters 300W Max 4 Ohm Pair car speaker

SKU CH-KFKZ-CEQG9 MPN VST150

1.5-inch bullet aluminium tweeters deliver 75 W RMS, 300 W peak and 103 dB sensitivity across 2 kHz–22 kHz

  • TypeTweeter
  • Speaker Size1.5"
  • Vehicle TypeAutomotive
  • ColorBlack
  • Peak Power300 Watts
  • RMS Power75 Watts
  • Clear highs up to 22 kHz from 1.5" bullet aluminum tweeters
  • 75 W RMS continuous power with 300 W peak capacity
  • High 103 dB sensitivity produces loud output with less amplifier power
  • Compact 52 mm mounting hole fits most factory locations
  • 4-ohm impedance matches standard car audio systems

1.5" Bullet Tweeter Pair

The ALPHASONIK VST150 is a pair of 1.5-inch super bullet tweeters built for automotive audio systems. They handle 75 watts RMS and 300 watts peak power at 4 ohms. The aluminum diaphragms deliver a frequency response of 2kHz to 22kHz with 103dB sensitivity. These components suit drivers adding clear high-frequency detail to a factory or custom setup.

Upgrade from basic factory tweeters

Factory-installed tweeters often lack power handling and extended high-frequency output. The VST150 replaces those units when the system demands 75 watts RMS continuous power and peak capacity of 300 watts. The jump is worth it when the amplifier can deliver clean power above 2kHz and the installer needs a 52mm mounting hole with 1.78-inch mounting depth.

High-frequency headroom and limits

The tweeters comfortably reproduce frequencies from 2kHz to 22kHz at high output levels thanks to 103dB sensitivity and 35.5mm voice coils. They run out of authority below 2kHz, so a separate midrange or midbass driver is required for lower frequencies. The 2.72-inch overall diameter and 2.99-inch mounting diameter define the installation envelope.

Highlights

  • Clear highs up to 22 kHz from 1.5" bullet aluminum tweeters
  • 75 W RMS continuous power with 300 W peak capacity
  • High 103 dB sensitivity produces loud output with less amplifier power
  • Compact 52 mm mounting hole fits most factory locations
  • 4-ohm impedance matches standard car audio systems

Specifications

BrandAlphasonik
TypeTweeter
Speaker Size1.5"
ModelVST150
Vehicle TypeAutomotive
ColorBlack
Part NumberVST150
Peak Power300 Watts
RMS Power75 Watts
Impedance4 Ohm
FeaturesFrequency Response: 2kHz-22kHz

Questions about this item

What size mounting hole do these 1.5" bullet tweeters need?

Each tweeter requires a 2.05 inch or 52 mm mounting hole to fit correctly.

How do I wire the VST150 tweeters to my amplifier without damaging them?

Connect each 4 ohm tweeter in parallel for a 2 ohm load or series for 8 ohms, matching your amp's stable impedance and using a high-pass crossover at 2 kHz or higher.

When should I replace the aluminum diaphragms on these super bullet tweeters?

Replace them if you hear harshness, distortion above 22 kHz, or a drop from the rated 103 dB sensitivity, which signals diaphragm fatigue.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.