ALPHASONIK
ALPHASONIK VNM654 6.5" Midrange Car Speaker Pair 300W RMS 4 Ohm
A 6.5-inch midrange driver pair rated at 300 W RMS with a neodymium magnet and 92 dB sensitivity
- TypeSpeaker
- Speaker Size6.5"
- Vehicle TypeAutomotive
- ColorBlack
- Peak Power1200 Watts
- RMS Power300 Watts
- 300 W RMS power handling for loud, clear midrange
- 1200 W peak capacity handles dynamic musical transients
- 92 dB sensitivity produces high output with modest amplifier power
- 56 mm mounting depth fits tight factory door cavities
- 150 Hz – 8 kHz frequency response covers critical vocal range
6.5" midrange driver pair
These 6.5 inch midrange speakers are built for car audio systems that need clear vocal and instrument reproduction. The low-profile design fits factory mounting locations without modification. Each driver handles 300 watts RMS and peaks at 1200 watts with a 4 ohm impedance.
Ideal for component upgrades, not full-range use
Installers building a component system with separate tweeters and crossovers will benefit from the 150Hz to 8kHz response and 92dB sensitivity. Buyers wanting a single speaker to cover bass through treble should look at coaxial or full-range models instead.
Mounting depth of 2.20 inches decides fit
The 56 millimetre mounting depth and 5.53 inch cutout diameter determine whether these drivers sit behind your door panel or dash. Measure the available space before ordering; no other dimension in the data affects installation.
Highlights
- 300 W RMS power handling for loud, clear midrange
- 1200 W peak capacity handles dynamic musical transients
- 92 dB sensitivity produces high output with modest amplifier power
- 56 mm mounting depth fits tight factory door cavities
- 150 Hz – 8 kHz frequency response covers critical vocal range
Specifications
| Brand | Alphasonik |
|---|---|
| Type | Speaker |
| Speaker Size | 6.5" |
| Model | VNM654 |
| Vehicle Type | Automotive |
| Color | Black |
| Part Number | VNM654 |
| Peak Power | 1200 Watts |
| RMS Power | 300 Watts |
| Impedance | 4 Ohm |
| Features | Impedance: 4 Ohms |
Questions about this item
What amplifier power and impedance match the 300W RMS 4 Ohm rating of these VNM654 speakers?
Use an amplifier that delivers around 300W RMS per channel at 4 Ohms so the VNM654 midrange drivers receive clean power without clipping or overloading the voice coils.
Will the 5.53" mounting hole and 2.20" depth fit the factory door cut-outs I am keeping?
The VNM654 needs a 5.53" (140mm) cut-out and 2.20" (56mm) mounting depth; measure your existing openings to confirm they meet or exceed those dimensions before installing.
How can I verify the VNM654 is performing correctly after installation?
Play a 150Hz–8kHz test tone at moderate volume and listen for clear, undistorted midrange output; a smooth response across that band and 92dB sensitivity indicate the speakers are working as designed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



