We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Alphacool

Alphacool Hirose 4pin Male to D-Tap Power Cable 50cm

SKU CH-VYBC-G6KHN

Connects Hirose 4-pin devices to D-Tap power sources with a 50 cm cable tested for 100% continuity

  • Powers Hirose 4-pin devices from any D-Tap source
  • 50 cm cable keeps rigs tidy and flexible
  • 100 % continuity tested for reliable operation
  • Compatible with Sound Devices 88 88 and Zoom F8
  • Also drives RTMotion MK 3.1 and SmallHD monitors

Hirose 4pin to D-Tap Cable

This cable connects professional audio and video equipment using a Hirose 4-pin male connector to a D-Tap power source. It is designed for operators powering Sound Devices, ZOOM F8, RTMotion MK 3.1 Lens Control System or SmallHD monitors from standard D-Tap batteries.

Capacity and headroom

The 50 cm length provides a short reach suitable for rig-mounted devices without excess cable slack. It handles the power demands of the listed devices but does not extend far enough for floor-mounted battery packs or large camera cages.

Practical limits of the interface

The Hirose 4-pin and D-Tap connectors carry DC power only and do not transmit audio, video or data signals. The cable is 100% continuity tested, yet it cannot power equipment requiring a different pinout, voltage or locking connector standard.

Highlights

  • Powers Hirose 4-pin devices from any D-Tap source
  • 50 cm cable keeps rigs tidy and flexible
  • 100 % continuity tested for reliable operation
  • Compatible with Sound Devices 88 88 and Zoom F8
  • Also drives RTMotion MK 3.1 and SmallHD monitors

Specifications

No published specifications for this item yet.

Questions about this item

Will the Hirose 4-pin male end fit my older Sound Devices 888 recorder?

The cable’s Hirose 4-pin male connector matches the power input on the Sound Devices 888, so it will plug in directly.

How can I verify the cable is delivering power correctly once connected?

Each unit is 100 % continuity tested, so a secure connection and normal device operation confirm it is working as intended.

Does the package include a D-Tap power source or only the cable itself?

Only the 50 cm Hirose 4-pin male to D-Tap cable is supplied; a D-Tap power source must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.