Alphacool
Alphacool D-tap to 0B 5 Pin 60 cm 2 in 1 accessory
A 60 cm D-tap to 0B 5 pin cable powers a Transvideo Starlite HD5 monitor from a V-mount or Gold-mount battery
- Powers Transvideo Starlite HD5 from V-mount or Gold-mount batteries via D-tap
- D-tap male to 0B 5-pin male connectors deliver direct power
- 60 cm straight cable keeps rig tidy
- Each cable tested for short-circuit and breakdown protection
- Purpose-built accessory for ARRI monitor compatibility
Power cable for Transvideo Starlite HD5
This 2-in-1 accessory connects a V-mount or Gold-mount battery with a female D-tap output to the Transvideo Starlite HD5 ARRI monitor. The straight cable carries power from the battery to the monitor's 0B 5-pin input. It is intended for camera operators and field technicians who need a direct power link without an intermediate plate. Each unit is tested for short circuits before shipping.
Thermals noise and power draw
The cable is a passive copper assembly with no active electronics, so it generates no heat and produces no audible noise during operation. Power draw is determined entirely by the connected monitor and the battery's capacity, not by the cable itself. The 60 cm length keeps voltage drop minimal for typical on-set distances. No fan, pump or cooling consideration applies to this accessory.
Replaces proprietary monitor power leads
This cable replaces a lost or damaged original power lead for the Transvideo Starlite HD5, removing the need for a dedicated AC adapter when a D-tap battery is already in use. The upgrade is worth it when a shoot relies on V-mount or Gold-mount power distribution and the operator wants a single, tested cable instead of adapting multiple connectors. It does not serve monitors with different pinouts or voltage requirements.
Highlights
- Powers Transvideo Starlite HD5 from V-mount or Gold-mount batteries via D-tap
- D-tap male to 0B 5-pin male connectors deliver direct power
- 60 cm straight cable keeps rig tidy
- Each cable tested for short-circuit and breakdown protection
- Purpose-built accessory for ARRI monitor compatibility
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the D-tap end to a V-mount or Gold-mount battery without reversing polarity?
Align the two-pin D-tap male plug with the battery's female D-tap socket; the keyed shape only fits one way, so it cannot be inserted backwards.
What upkeep does the 0B 5-pin male connector need after repeated mating cycles?
Inspect the five pins for bent contacts or debris before each use; a dry compressed-air blast and a visual check are the only routine care required.
At what current draw does the 60 cm cable's voltage drop become noticeable on a Transvideo Starlite HD5?
The 60 cm length keeps resistance low; measurable drop typically appears only above the monitor's normal operating draw, well within typical V-mount battery output.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



