Alphacool
Alphacool 2 in 1 accessory 8-port PoE switch 4 SFP 30W 240W -40C 80C
Industrial 8-port Gigabit PoE+ switch with 4 SFP slots, 30W per port, 240W total, redundant 48-57V DC input and -40C to 80C operation
- 8 RJ45 ports with auto MDI/MDI-X and 4 SFP slots for flexible connectivity
- PoE+ up to 30W per port and 240W total power budget for connected devices
- Web-managed Layer 2 features including VLAN, IGMP snooping and STP/RSTP redundancy
- Dual 48-57V DC power inputs maintain operation if one supply fails
- Industrial aluminium housing rated from -40C to 80C with 6KV lightning protection
Industrial 8-port PoE switch with 4 SFP slots
This managed Layer 2 switch provides eight 10/100/1000Base-T RJ45 ports and four 1000Base-X SFP slots for fibre uplinks. It delivers up to 30W per PoE port to a total budget of 240W. Redundant 48-57V DC inputs and an aluminium DIN-rail chassis rated from -40C to 80C suit harsh industrial environments.
For networks needing managed PoE
It suits installers who require web-managed VLANs, IGMP snooping and STP/RSTP on a single DIN-rail device. Buyers who need 10G uplinks, higher per-port PoE budgets or AC-powered operation should look elsewhere.
240W total PoE budget across eight ports
The switch comfortably powers eight 30W devices such as PTZ cameras or wireless access points simultaneously. Fibre uplinks handle gigabit backbone traffic. The budget is exhausted if every port draws the maximum 30W, leaving no headroom for additional PoE devices.
Highlights
- 8 RJ45 ports with auto MDI/MDI-X and 4 SFP slots for flexible connectivity
- PoE+ up to 30W per port and 240W total power budget for connected devices
- Web-managed Layer 2 features including VLAN, IGMP snooping and STP/RSTP redundancy
- Dual 48-57V DC power inputs maintain operation if one supply fails
- Industrial aluminium housing rated from -40C to 80C with 6KV lightning protection
Specifications
No published specifications for this item yet.
Questions about this item
What DC voltage source do I need to power the 8-port PoE switch?
The unit accepts redundant 48–57 V DC inputs through two industrial-grade power interfaces for continuous operation.
Can I keep using my existing 100 Mbps cameras on the RJ45 ports?
Yes, the eight 10/100/1000Base-T ports auto-negotiate speed and support Auto MDI/MDI-X for legacy 100 Mbps devices.
How do I confirm the 240 W PoE budget is being allocated correctly after installation?
Log into the web management interface to view per-port PoE draw, VLAN status, IGMP snooping and STP/RSTP topology in real time.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



