We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled 40 cm cable with right-angle 3.5 mm jack and rotatable 5-pin connector

Alphacool

Alphacool 2 in 1 accessory 3.5mm to 5 pin rotatable 180 degrees 40cm

SKU CH-1DFM-JVQJM

Feeds timecode from 5-pin LEMO devices to Tentacle Sync via 3.5mm jack with rotatable right-angle connector

  • Right-angle 5-pin plug rotates 180° so cable exits upward and clears the CFast door
  • 5 mm Neutrik mini-TRS jack feeds timecode into Tentacle Sync from ARRI Alexa or Sound Devices recorders
  • 40 cm cable links Tentacle generator to any camera or recorder with 5-pin male LEMO input
  • Connectors rated for over 5000 mating cycles with full EMC shielding and shock resistance
  • Cable length can be customised to 16 in or other lengths on request

Cable orientation and length

This Alphacool accessory is a 40 cm cable that converts a 3.5 mm mini-TRS jack to a right-angle 5-pin connector rotatable through 180 degrees. The red-dot positioning pin faces downward so the cable outlet points upward, preventing interference with a CFast card door. It is intended for professionals who need reliable timecode connections on set.

Suited for Tentacle Sync workflows

The cable feeds timecode from Tentacle Sync generators into devices that accept a 5-pin LEMO input, and it jam-syncs Tentacle units from ARRI Alexa or Sound Devices 702T, 744T, 788T, 664 and 633 recorders. Users requiring a straight 5-pin plug, a different jack type or a length other than 40 cm should look at alternative cables.

Build integration and clearance

The right-angle rotatable plug routes the cable vertically, freeing space around the memory card slot and reducing strain on the camera body. Neutrik and Eonvic connectors rated for more than 5000 insertions provide shielding and vibration resistance, so the link stays secure during handheld or gimbal operation.

Highlights

  • Right-angle 5-pin plug rotates 180° so cable exits upward and clears the CFast door
  • 5 mm Neutrik mini-TRS jack feeds timecode into Tentacle Sync from ARRI Alexa or Sound Devices recorders
  • 40 cm cable links Tentacle generator to any camera or recorder with 5-pin male LEMO input
  • Connectors rated for over 5000 mating cycles with full EMC shielding and shock resistance
  • Cable length can be customised to 16 in or other lengths on request

Specifications

No published specifications for this item yet.

Questions about this item

What type of 3.5 mm jack does my Tentacle Sync unit need for this cable to connect?

The cable ends in a right-angle Neutrik mini-TRS 3.5 mm jack that plugs directly into the Tentacle Sync generator.

Will the 180-degree rotatable 5-pin connector clear the CFast card door on my ARRI Alexa Mini?

Yes, the right-angle 5-pin plug rotates 180 degrees so the cable outlet points upward, keeping the memory card door unobstructed.

How can I verify the cable is passing timecode correctly after I connect it?

Each assembly is tested for pin-to-pin continuity and high-voltage insulation; once connected, confirm the receiving device shows valid timecode lock from the Tentacle unit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.