We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Deep black 90 degree revolvable compression fitting for 13/10mm tubing

Alphacool

Alphacool 17075 13/10mm 90° Revolvable Compression Fitting Deep Black

SKU CH-A9QA-C6K3A MPN 17075

Connects 13/10 mm tubing via a G1/4 thread with a 90° revolvable bend for flexible routing

  • FeaturesThis connector can be used to connect 13/10mm tubing with a
  • 90° revolvable design eases tube routing in tight spaces
  • 13/10 mm compression fitting secures tubing without clamps
  • G1/4 thread fits standard water-cooling components
  • Deep Black finish resists peeling through chromatised surface bond
  • High-flow inner diameter maintains coolant velocity through the bend

13/10 mm G1/4 Revolvable Elbow

This Alphacool 17075 compression fitting joins 13/10 mm tubing to a G1/4 port with a 90° bend that rotates freely for clean routing. The Deep Black chromatised finish bonds to the brass body for durable colour. It is a single fitting sold new for custom liquid-cooling loops.

Suits builders who need a rotatable 90° joint

Installers who prefer rigid tubing, a straight connector, or a different thread size will need another part. The fitting only accepts 13/10 mm soft tube and a G1/4 female port.

13/10 mm tube size with G1/4 thread

Match both the 13 mm inner and 10 mm outer diameter of your tubing to this fitting, and confirm the component you connect it to has a G1/4 thread. Without those exact dimensions the compression seal will not hold.

Highlights

  • 90° revolvable design eases tube routing in tight spaces
  • 13/10 mm compression fitting secures tubing without clamps
  • G1/4 thread fits standard water-cooling components
  • Deep Black finish resists peeling through chromatised surface bond
  • High-flow inner diameter maintains coolant velocity through the bend

Specifications

BrandAlphacool
Model17075
FeaturesThis connector can be used to connect 13/10mm tubing with a 1/4“ thread. The fitting has a 90° bend and is revooable, making it interesting for comfortable tubing in the system.
Part Number62368

Questions about this item

What tubing size must I already have for the 13/10mm fitting to seal correctly?

You need 13/10mm tubing — 13mm outer diameter and 10mm inner diameter — so the compression ring can grip the tube securely.

Will the G1/4 thread on this 90° revolvable fitting mate with the G1/4 ports on my existing radiator or block?

Yes, the fitting uses a standard G1/4 thread that matches the G1/4 ports found on most water-cooling radiators, blocks and reservoirs.

How can I confirm the fitting is oriented properly after I tighten it in my loop?

The revolvable 90° joint lets you rotate the elbow to the exact angle you need; once positioned, the compression nut locks it in place so the tubing runs without kinks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.