We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Alphacool 17042 G1/4" female-female 90° brass fitting in Deep Black

Alphacool

Alphacool 17042 G1/4" Female-Female 90° Fitting Deep Black

SKU CH-MPAE-9YP85 MPN 17042

Connects two G1/4" male-threaded components at a right angle using a brass 90-degree female-female fitting in Deep Black

  • FeaturesA bushing with two 1/4" inner threads is especially interest
  • Connects two male-threaded components at a right angle
  • G1/4" female threads on both ends ensure secure fit
  • 90° fixed angle simplifies tight-loop routing
  • Brass body with Deep Black chromatised finish resists peeling
  • High-flow inner bore maintains coolant velocity

90° G1/4" Female-Female Fitting

The Alphacool 17042 connects two male G1/4" threaded components at a right angle. Its brass construction with a Deep Black chromatised finish resists peeling and maintains colour. This non-rotary fitting suits custom liquid-cooling loops where space or routing demands a fixed 90-degree turn.

Thermals noise and power

As a passive brass component the fitting adds no heat, noise or electrical draw to the system. The high-flow internal bore minimises flow restriction so pump workload remains unchanged. Correctly installed it creates a leak-free seal without maintenance.

Right-angle thread compatibility

This part only joins two external G1/4" threads in a fixed 90° orientation. Builders needing rotary adjustment, different thread sizes or straight-through connections must choose another fitting.

Highlights

  • Connects two male-threaded components at a right angle
  • G1/4" female threads on both ends ensure secure fit
  • 90° fixed angle simplifies tight-loop routing
  • Brass body with Deep Black chromatised finish resists peeling
  • High-flow inner bore maintains coolant velocity

Specifications

BrandAlphacool
Model17042
FeaturesA bushing with two 1/4" inner threads is especially interesting when planning on extending fittings or to connect other components with an outer thread to a fitting. This bushing is extremely handy thanks to its 90° kink.
Part Number64216

Questions about this item

How do I install the 17042 90-degree G1/4" female-female fitting without cross-threading the brass threads?

Hand-tighten each G1/4" male component into the female ports until the O-ring seats, then add a quarter-turn with a soft-jaw wrench; the fixed 90° angle means you must align both connections before final tightening.

What maintenance will the Deep Black chromatised finish on the 17042 fitting need over time?

The chromatised coating is bonded to the brass body to resist peeling; wipe with a lint-free cloth and avoid abrasive cleaners to preserve the Deep Black colour.

What flow restriction appears first when looping multiple 17042 90° fittings in a high-flow custom cooling system?

Each fixed 90° bend adds turbulence, so pressure drop across the fitting becomes the limiting factor before the G1/4" thread diameter does.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.