We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear flexible tube with 16 mm outer diameter, 1 metre length, retail box

Alphacool

Alphacool 1015267 AlphaTube HF 16/10 Clear 1m tubing

SKU CH-7XTV-YN2SC MPN 1015267

Clear tubing with 10 mm inner and 16 mm outer diameter for liquid-cooling loops, supplied in a 1 m length

  • Color/FinishClear
  • Clear tubing shows coolant colour without dye particles
  • 16 mm outer diameter and 10 mm inner diameter for 3/8" ID fittings
  • 1 metre length suits compact or extended loop runs
  • German manufacturing ensures consistent material quality
  • Flexible compound eases tight-radius bends during installation

Clear tubing for custom loops

This 1 metre length of transparent tubing is designed as the fluid path in a custom water-cooling build. The 16 mm outer and 10 mm inner dimensions match standard 3/8 inch ID compression fittings used by enthusiasts and system integrators. It suits anyone assembling a new loop or extending an existing one with a clean, colour-free appearance.

Capacity and bend tolerance

The 10 mm bore provides unrestricted flow for typical pump and radiator combinations found in desktop loops. Its material blend allows tight bend radii without kinking, so runs between closely spaced components stay neat. Very long runs or multiple sharp turns in a single segment will eventually increase flow resistance beyond what a single pump can overcome.

Interface and fitting limits

The tubing seals on G1/4 threaded compression fittings sized for 16/10 mm tube; push-fit or barbed connectors not matching these dimensions will not seal reliably. It is not rated for pressurised plumbing outside a PC cooling loop, nor for fluids incompatible with the synthetic polymer blend.

Highlights

  • Clear tubing shows coolant colour without dye particles
  • 16 mm outer diameter and 10 mm inner diameter for 3/8" ID fittings
  • 1 metre length suits compact or extended loop runs
  • German manufacturing ensures consistent material quality
  • Flexible compound eases tight-radius bends during installation

Specifications

Color/FinishClear
BrandAlphacool
Model1015267
Part Number1015267

Questions about this item

Will the 16/10 AlphaTube HF fit the 13/10 compression fittings I already own?

No — the 16/10 tubing has a 16 mm outer diameter and 10 mm inner diameter, so it requires 16/10 fittings; 13/10 fittings are sized for smaller tubing and will not seal correctly.

How can I confirm the AlphaTube HF 16/10 Clear is flowing properly after I install it?

Power the loop and watch the clear tubing — you should see coolant moving steadily without bubbles, and the reservoir level should stay constant once the loop is bled.

What comes in the retail box and what extra parts do I need to buy?

The box contains one metre of AlphaTube HF 16/10 Clear tubing; you must purchase 16/10 compression fittings, coolant, and any clamps or tools separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.