ALMOCN 2PCS 2" 8Ohm 10W Full Range Speaker
Two 2-inch 8-ohm full-range drivers rated at 10 watts each for compact DIY audio projects
- TypePortable Speaker
- Connector TypeCoaxial
- Total Power10 watts
- Satellite RMS Power /ea10 watts
- Driverdynamic_driver
- Dimension0.39 in x 0.78 in x 0.78 in
- Two 2-inch drivers deliver full-range stereo sound
- 8 Ω impedance matches common amplifier outputs
- 10 W power handling supports clear audio at moderate volumes
- Compact 53 mm diameter fits tight DIY enclosures
- Low 30 mm profile suits slim portable speaker builds
Compact driver pair for DIY audio builds
Two 53 mm full-range drivers rated at 10 watts and 8 ohms arrive ready for custom enclosures or replacement repairs. The coaxial connector simplifies wiring for hobbyists building Arduino-powered sound projects or small desktop systems. Each unit weighs 0.132 kg and measures 30 mm tall for tight mounting spaces.
Ideal for experimenters and repair work
Makers prototyping portable Bluetooth boxes, robot voice modules or stereo monitoring panels will appreciate the high sensitivity and usable low-frequency response. Installers needing weather-resistant cones, built-in crossovers or sealed cabinets should source different components because this pair supplies raw drivers only.
8 ohm impedance sets amplifier matching
The 8 ohm nominal load lets the speakers run safely from most class-D modules and low-voltage boards without extra matching networks. Builders planning 4 ohm loads or bridge-tied-load configurations must verify their amplifier specs before committing to this pair.
Highlights
- Two 2-inch drivers deliver full-range stereo sound
- 8 Ω impedance matches common amplifier outputs
- 10 W power handling supports clear audio at moderate volumes
- Compact 53 mm diameter fits tight DIY enclosures
- Low 30 mm profile suits slim portable speaker builds
Specifications
| Brand | ALMOCN |
|---|---|
| Model | NO |
| Type | Portable Speaker |
| Connector Type | Coaxial |
| Total Power | 10 watts |
| Satellite RMS Power /ea | 10 watts |
| Driver | dynamic_driver |
| Dimension | 0.39 in x 0.78 in x 0.78 in |
| Weight | 0.132 kilograms |
| Package Contents | NO |
Questions about this item
How much continuous power can the 8 ohm voice coil handle before overheating?
The driver is rated for 10 watts RMS, so sustained output above that level will cause the coil to overheat.
How warm does the magnet assembly get and is there any audible noise when driven at full power all day?
The 53 mm full-range unit has no fan; heat dissipates through the steel basket and the speaker itself produces the sound, so no extra mechanical noise appears.
What amplifier or wiring must I already have to connect these two raw drivers?
You need an amplifier with 8 ohm speaker terminals and two pairs of speaker wire; the drivers have only bare solder tabs for connection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
