We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular media converter with one RJ-45 port and one SC fiber port, status LEDs visible, external power adapter included

Allied Telesis

Allied Telesis AT-MC102XL-90 Fast Ethernet Media Converter 100Base-FX 1.24 Mile

SKU CH-EGZ1-T94NQ MPN AT-MC102XL-90

Converts Fast Ethernet copper to multi-mode fiber with an SC duplex link up to 1.24 miles using an external 120 V adapter

  • TypeMedia Converter
  • ColorBlack
  • Specifications1 x RJ-45 1 x SC Connectivity Media: 100Base-TX UTP 100Base-
  • FeaturesStatus Indicators: Link OK , Power , Receive , Test mode Pow
  • Extends UTP networks up to 1.24 miles over multi-mode fiber
  • Converts 100Base-TX to 100Base-FX with SC duplex connector
  • Compact 1.00" x 4.10" x 3.70" design fits rack or wall mounts
  • Front-panel LEDs show Link, Power, Receive and Test status at a glance
  • Operates on 6 W via external 120 V AC adapter

Fast Ethernet Media Converter for UTP-to-Fibre

The Allied Telesis AT-MC102XL-90 converts 100Base-TX copper links to 100Base-FX multi-mode fibre at 1310 nm. It supports a single RJ-45 port and a duplex SC port for distances up to 1.24 mile. The unit is rack-mountable or wall-mountable with a compact 1.00" x 4.10" x 3.70" form factor.

Verify Copper and Fibre Compatibility Before

Confirm the existing network runs 100Base-TX over UTP cabling and that the fibre plant uses multi-mode duplex SC connectors at 1310 nm. The converter requires an external power adapter operating at AC 120 V and 50/60 Hz. Ensure the link distance does not exceed the stated 1.24 mile limit for reliable operation.

Low Power Draw and Silent Operation in Normal Use

The device draws 6 Watt during operation and uses an external power adapter, keeping the converter itself free of active cooling. Status indicators show Link OK, Power, Receive and Test mode for quick diagnostics. The lightweight 0.65 lb chassis produces no audible noise under typical network loads.

Highlights

  • Extends UTP networks up to 1.24 miles over multi-mode fiber
  • Converts 100Base-TX to 100Base-FX with SC duplex connector
  • Compact 1.00" x 4.10" x 3.70" design fits rack or wall mounts
  • Front-panel LEDs show Link, Power, Receive and Test status at a glance
  • Operates on 6 W via external 120 V AC adapter

Specifications

BrandAllied Telesis
ModelAT-MC102XL-90
TypeMedia Converter
ColorBlack
Specifications1 x RJ-45
1 x SC
Connectivity Media:
100Base-TX UTP
100Base-FX 1310 nm Multi-mode Fiber
Distance Support: 1.24 Mile
Dimension: 1.00" x 4.10" x 3.70"
Weight: 0.65 lb.
FeaturesStatus Indicators: Link OK , Power , Receive , Test mode
Power
Frequency Required: 50/60 Hz
Nominal Voltage: AC 120 V
Power Consumption Operational: 6 Watt
Type: External power adapter
Shipping weight1.36 kg
Package size305 × 254 × 203 mm

Questions about this item

Does the AT-MC102XL-90 come with a power supply or must one be purchased separately?

An external power adapter is included; the unit draws 6 W at AC 120 V, 50/60 Hz.

Should I choose the AT-MC102XL-90 or a different model for a 2 km multi-mode link?

This converter supports 100Base-FX multi-mode fiber up to 1.24 miles (2 km), matching that distance.

Will the 100Base-FX port deliver full 100 Mbps throughput over the 1.24 mile fiber run?

Yes, the 1310 nm multi-mode interface is rated for 100Base-FX at the full 1.24 mile maximum distance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.