We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular PoE+ injector module with two RJ-45 ports and power input

Allied Telesis

Allied Telesis AT-6101GP-10 PoE+ injector switch module

SKU CH-QVNC-9WG4E MPN AT-6101GP-10

Single-port PoE+ injector delivers up to 33 W to gigabit devices over existing Ethernet cabling

  • Delivers up to 33 W to PoE+ devices via single Ethernet cable
  • Powers compatible access points, cameras and phones using IEEE 802.3 at standard
  • Gigabit RJ-45 ports maintain 1000 Mbps data while supplying power
  • Compact external module fits tight spaces at 5.5" × 2.6" × 1.4
  • Meets FCC Part 15 Class B, CISPR 22 Class B and EN 55024 immunity standards

Single-port PoE+ injector

The Allied Telesis AT-6101GP-10 is a single-port Power over Ethernet Plus injector that delivers data and up to 33 W of power over a Gigabit Ethernet link. It accepts 110 V AC or 220 V AC input and provides 55 V DC output to compatible devices.

Suits IEEE 802.3at endpoints.

This module suits installers powering VoIP phones, IP cameras or wireless access points that comply with the IEEE 802.3at standard. It is not for deployments requiring multiple powered ports from one unit, nor for devices that only support passive PoE or the earlier 802.3af 15 W limit.

33 W IEEE 802.3at output decides compatibility

The injector supplies a maximum of 33 W at 55 V DC under the IEEE 802.3at standard. Verify that the powered device draws within this budget and negotiates 802.3at; equipment needing more power or a different PoE class will not operate correctly.

Highlights

  • Delivers up to 33 W to PoE+ devices via single Ethernet cable
  • Powers compatible access points, cameras and phones using IEEE 802.3 at standard
  • Gigabit RJ-45 ports maintain 1000 Mbps data while supplying power
  • Compact external module fits tight spaces at 5.5" × 2.6" × 1.4
  • Meets FCC Part 15 Class B, CISPR 22 Class B and EN 55024 immunity standards

Specifications

BrandAllied Telesis Inc.
Shipping weight0.58 kg
Package size229 × 64 × 64 mm

Questions about this item

Does the AT-6101GP-10 require a separate PoE switch, or can I plug it directly into my existing non-PoE gigabit switch?

You connect the injector between your non-PoE switch and the powered device; the input port accepts 10/100/1000Base-T from any standard gigabit switch.

Will my older 10/100 Mbps IP cameras and VoIP phones still negotiate power and data through this injector?

Yes, the RJ-45 ports auto-negotiate down to 10/100Base-TX while still delivering up to 33 W at 55 V DC per IEEE 802.3at.

After installation, how can I confirm the module is delivering PoE+ power to my access point?

The access point should power on and show a link light on the injector’s output port; the unit supplies 33 W at 55 V DC when the connected device requests Class 4 power.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.