We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Allied Telesis AT-2711FX/ST-901 PCI-Express network card with ST fiber connector

Allied Telesis

Allied Telesis AT-2711FX/ST-901 100Mbps ST PCI-Express network card

SKU CH-ZZF2-Q3QEH MPN AT-2711FX/ST-901

A 100Mbps fibre network card with an ST connector for PCI-Express slots

  • Speed100Mbps
  • Connectors1 x ST
  • InterfacePCI-Express
  • BUS32-bit PCI
  • FeaturesAT-2711FX Fast Ethernet Fiber Network Interface Card design
  • Weight20
  • 100 Mbps Fast Ethernet for reliable fibre connectivity
  • Single ST connector links directly to multimode fibre networks
  • PCI-Express interface fits modern desktop and server slots
  • 32-bit PCI bus architecture keeps CPU overhead low
  • Low power consumption reduces system energy draw

Product Identity

The Allied Telesis AT-2711FX/ST-901 is a 100Mbps Fast Ethernet fibre network card with a single ST connector. It uses a PCI-Express form factor while operating on a 32-bit PCI bus. The card targets users migrating from older Allied Telesis 100Mbps fibre adapters to newer motherboard slots.

Sustained Load Behaviour

The design aims to deliver the maximum possible bandwidth and bus efficiency for continuous 100Mbps fibre traffic. Low power consumption is cited as a benefit that supports steady operation without excessive draw. The 32-bit PCI bus architecture sets the throughput ceiling for prolonged data transfers.

Thermals Noise and Power

Low power consumption is highlighted as a key characteristic of the AT-2711FX design. Reduced power draw typically results in lower heat output during normal use. No active cooling components are mentioned in the specifications. The card weighs 20 units.

Highlights

  • 100 Mbps Fast Ethernet for reliable fibre connectivity
  • Single ST connector links directly to multimode fibre networks
  • PCI-Express interface fits modern desktop and server slots
  • 32-bit PCI bus architecture keeps CPU overhead low
  • Low power consumption reduces system energy draw

Specifications

BrandAllied Telesis
ModelAT-2711FX/ST-901
Speed100Mbps
Connectors1 x ST
InterfacePCI-Express
BUS32-bit PCI
FeaturesAT-2711FX Fast Ethernet Fiber Network Interface Card design gives you the maxim possible bandwidth and bus efficiency, other benefits are: capability and Low Power Consumption.
For the current customers who are using Allied Telesis 100Mbps Fiber cards (AT-2701FX), and want to upgrade their systems to PCI-Express, AT-2711FX Fast Ethernet Fiber Network Interface Card is the ultimate solution.
Weight20
Shipping weight0.45 kg
Package size122 × 69 × 46 mm

Questions about this item

How much power does the AT-2711FX/ST-901 draw when running continuously?

The card is designed for low power consumption, keeping heat and energy use minimal during all-day operation.

What slot type must my motherboard provide for this card?

Your motherboard needs a free PCI-Express slot; the card uses a 32-bit PCI bus interface.

Will the AT-2711FX/ST-901 work alongside my older AT-2701FX fibre cards?

Yes, it is built as a direct PCI-Express upgrade for systems still using the 100Mbps AT-2701FX cards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.