We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised steel EMT conduit, 3/4 inch trade size, five feet long, grey finish

Allied

Allied 869609 EMT Metallic Conduit 3/4 in 5 ft video accessory

SKU CH-A1CC-ASD1V

Galvanized steel EMT conduit, 3/4 in trade size, 5 ft length, resists flattening, kinking and splitting

  • TypeCable Management & Conduit
  • ColorGray
  • Galvanized finish resists corrosion on the conduit
  • Meets ANSI C80.3 and UL 797 safety standards
  • 83 in inside diameter fits standard cable runs
  • 04 in wall thickness resists flattening and kinking
  • 5 ft nominal length suits typical installation needs

Allied EMT Metallic Conduit 3/4 in 5 ft

This Allied conduit is a 5-foot length of standard Electrical Metallic Tubing made from galvanized steel. It carries ANSI C 80.3 and UL 797 listings and is finished in gray to resist corrosion. The tubing protects and routes cables in exposed or concealed installations. Trade size is 3/4 inch with a 0.83 in inside diameter.

Suits standard conduit runs.

Builders who need code-compliant raceway for typical residential or light-commercial wiring will find this EMT a direct fit. The 0.04 in wall thickness resists flattening, kinking and splitting during bending and pulling. Installers who must pull larger conductor counts or require a wider internal passage should consider a larger trade size instead.

0.83 in inside diameter governs cable capacity

The decisive figure is the 0.83 in inside diameter, which sets the maximum number and size of conductors the raceway can hold under fill rules. Outside diameter is 0.92 in and wall thickness is 0.04 in. Verify that your wire count and insulation types stay within the permitted fill percentage for this internal dimension.

Highlights

  • Galvanized finish resists corrosion on the conduit
  • Meets ANSI C80.3 and UL 797 safety standards
  • 83 in inside diameter fits standard cable runs
  • 04 in wall thickness resists flattening and kinking
  • 5 ft nominal length suits typical installation needs

Specifications

BrandALLIED TUBE & CONDUIT
TypeCable Management & Conduit
ColorGray

Questions about this item

What fitting size matches the 0.92 in outside diameter of this EMT conduit?

Use 3/4 in trade-size EMT connectors and couplings; the 0.92 in outside diameter is the standard for this trade size.

Can I join this galvanized EMT conduit to older threaded rigid conduit in the same run?

Yes — pair it with a 3/4 in EMT-to-rigid compression coupling; the galvanized finish meets ANSI C80.3 and UL 797 for mixed-metal installations.

How do I verify the conduit meets code after I bend and install it?

Check that bends show no flattening, kinking or splitting, confirm the 0.04 in wall thickness is intact, and ensure the galvanized coating remains unbroken per UL 797.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.