Allegro
Allegro 9210-02 Supplied Air Pump Package with (2) 100 ft Hoses, (2) Breathing Tubes, (2) Full Face Masks
Supplied air pump package with a 3/4 hp ambient air pump, two 100 ft hoses, two breathing tubes and two full-face masks with universal headgear
- Complete respiratory protection kit with two full-face masks
- 3/4 hp ambient air pump delivers continuous supplied air
- Two 100 ft hoses provide extended work-area reach
- Includes two breathing tubes and universal headgear
- Ready-to-use package for two workers in hazardous environments
Supplied Air Pump Package
The Allegro 9210-02 is a complete supplied-air respirator system built around a 3/4 hp ambient air pump. It arrives with two 100 ft hoses, two breathing tubes and two full-face masks with universal headgear. The package is ready for immediate use in environments that require a continuous flow of clean breathing air.
Suited for two-person crews
This kit serves work teams of two who need mobile, pump-supplied air without relying on a fixed compressor installation. It is not intended for single users who only require one mask, nor for operations that demand higher pump output or longer hose runs than the included 100 ft lengths provide.
Capacity and headroom
The 3/4 hp pump delivers ambient air to both masks simultaneously through the supplied hoses, supporting typical abrasive blasting, spray painting or confined-space tasks for two operators. When a third worker is added or hose length must exceed 100 ft, the pump reaches its practical limit and a larger unit becomes necessary.
Highlights
- Complete respiratory protection kit with two full-face masks
- 3/4 hp ambient air pump delivers continuous supplied air
- Two 100 ft hoses provide extended work-area reach
- Includes two breathing tubes and universal headgear
- Ready-to-use package for two workers in hazardous environments
Specifications
| Brand | ALLEGRO INDUSTRIES |
|---|
Questions about this item
What power source must I already have for the 3/4 hp ambient air pump to run?
The pump requires a standard mains electricity supply; connect it to a grounded outlet rated for the motor's voltage and amperage before attaching the hoses.
Can I keep using my existing 100 ft hoses and full-face masks alongside the two of each included in package 9210?
Yes, the pump's outlet fittings accept standard supplied-air hose couplings, so your current hoses and masks will work as long as they match the same connection type.
How do I confirm the 3/4 hp pump is delivering breathable air to both masks after setup?
Turn on the pump, check that the pressure gauge reads within the green zone, then verify steady airflow at each mask's breathing tube with no kinks in the 100 ft hoses.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
