Ali Indistries Inc
Ali Indistries Inc 4238 600B Wet/Dry Sandpaper 25 Sheets 9x11in
Silicon-carbide wet/dry sheets in grits from 120 to 400 for sanding between coats of paint, sealer or varnish
- TypeSanders
- Wet-sanding between coats with silicon carbide abrasive
- Resin coating extends sheet life over standard glue bond
- 25 sheets per box for extended project use
- 9 x 11 inch sheets fit standard hand blocks
- Grit range 120 to 400 covers coarse to super fine
What This Sandpaper Does
This pack contains 25 sheets of silicon carbide wet/dry sandpaper measuring 9 by 11 inches. It is intended for metal working, body leveling and smoothing primers between coats of paint, sealer or varnish. The resin coating is designed to last longer than ordinary glue bond paper.
Grit Range and Grade Limits
The series covers grits 120 through 400, graded from coarse to super fine. Coarser grits remove material quickly for leveling, while finer grits prepare primers for finishing. No grits finer than 400 or coarser than 120 are included in this assortment.
Check Your Application Before Buying
Buyers who need grits outside the 120 to 400 range or who require a different sheet size should look elsewhere. The sheets are not suited for heavy stock removal on hard materials beyond the listed grades.
Highlights
- Wet-sanding between coats with silicon carbide abrasive
- Resin coating extends sheet life over standard glue bond
- 25 sheets per box for extended project use
- 9 x 11 inch sheets fit standard hand blocks
- Grit range 120 to 400 covers coarse to super fine
Specifications
| Type | Sanders |
|---|---|
| Brand | Ali Industries |
| Model | 4238 |
Questions about this item
Should I pick the 120, 150, 180, 220, 320, 400 or 600 grit for my job?
Choose 120 or 150 for coarse metal shaping and body levelling, 180 for fine levelling, 220 to 400 for smoothing primers, and 600 for final wet sanding between paint, sealer or varnish coats.
What does the 600 grit rating actually do on a panel?
The 600 grit sheets give a super-fine finish for wet sanding between coats of paint, sealer or varnish, removing orange peel and dust nibs without cutting through the previous layer.
How does the silicon carbide abrasive perform with water or oil?
Silicon carbide stays sharp when wet, so the sheets cut cleanly with water or solvent lubrication and the resin bond resists breakdown during prolonged wet sanding.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
