Albion Inc.
Albion Inc. ZORO SELECT 26Y437 Caster Wheel 8 in 900 lb Polyurethane
Polyurethane caster wheel supports 900 lb loads with 8 in diameter and roller bearing
- TypeWheelbarrows & Carts
- Supports heavy loads with 900 lb capacity
- Polyurethane tread resists wear at 98 Shore A firmness
- 8 in diameter rolls smoothly over rough ground
- Roller bearing reduces friction for easier movement
- Spanner bushings fit 1/2 in and 3/4 in axles
Caster Wheel 8 in 900 lb Polyurethane
The ZORO SELECT 26Y437 is a rigid caster wheel built for wheelbarrows and carts. It uses a polyurethane tread on a plastic core to support heavy loads across hard surfaces. The wheel measures eight inches in diameter and two inches wide. A roller bearing fits axle sizes of one-half or three-quarter inch with an included spanner bushing.
Builders moving heavy loads on flat ground
This wheel suits equipment rated between 300 and 999 pounds where a single 900 pound capacity meets the requirement. It is not for buyers who need non-marking treads on finished floors. It is not for applications requiring a swivel mechanism or a brake. It is not for users who must avoid Proposition 65 listed chemicals.
98 Shore A firm polyurethane tread
The tread hardness is rated at 98 Shore A for firm rolling resistance under maximum load. The hub length is two and seven-sixteenths inches. Standard tread shape distributes weight evenly across the contact patch. California Proposition 65 warnings apply for cancer and reproductive harm.
Highlights
- Supports heavy loads with 900 lb capacity
- Polyurethane tread resists wear at 98 Shore A firmness
- 8 in diameter rolls smoothly over rough ground
- Roller bearing reduces friction for easier movement
- Spanner bushings fit 1/2 in and 3/4 in axles
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
Does the 8 in caster wheel arrive with the spanner bushing already fitted or must I purchase it separately?
The wheel ships with the spanner bushing included so no extra purchase is required for installation.
How do I decide between the 1/2 in and 3/4 in axle options on the 900 lb wheel?
Measure your existing axle diameter; choose the 1/2 in bushing if the axle is 1/2 in and the 3/4 in bushing if it is 3/4 in.
What does the 98 Shore A rating tell me about how the polyurethane tread behaves under a 900 lb load?
The 98 Shore A hardness means the tread stays firm, resists flattening and rolls easily even when the wheel carries its full 900 lb capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
