Albion Inc.
Albion Inc. 5VR56 Caster Wheel Nylon 4 in 550 deg F yard tool
Nylon caster wheel rated for 800 lb loads and temperatures up to 550 deg F
- TypeWheelbarrows & Carts
- Nylon wheel withstands up to 550 deg F heat
- Supports 800 lb load rating for heavy carts
- Hard 85 Shore D tread resists wear
- Includes spanner bushing for 1/2 in axle fit
- 4 in diameter suits wheelbarrows and yard carts
4 inch Nylon Caster Wheel
The Albion Inc. 5VR56 caster wheel uses a hard nylon tread rated at 85 Shore D for equipment such as wheelbarrows and carts. It carries a load rating of 800 lb within a 300 to 999 lb range and fits a 1/2 in axle with an included spanner bushing. The wheel measures 4 in diameter by 2 in width with a 2 7/16 in hub length.
Sustained heat resistance
The nylon wheel and core material are rated for continuous exposure up to 550 deg F without softening. Roller bearings maintain smooth rotation during prolonged heavy loads across the 300 to 999 lb range. The hard 85 Shore D tread resists permanent deformation when the cart remains stationary under weight for extended periods.
Build and mounting details
A standard tread shape and non-marking nylon construction suit indoor and outdoor surfaces. The 1/2 in axle bore and supplied spanner bushing allow direct installation on compatible wheelbarrow or cart frames. California Proposition 65 notices indicate the product contains chemicals known to cause cancer and reproductive harm.
Highlights
- Nylon wheel withstands up to 550 deg F heat
- Supports 800 lb load rating for heavy carts
- Hard 85 Shore D tread resists wear
- Includes spanner bushing for 1/2 in axle fit
- 4 in diameter suits wheelbarrows and yard carts
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
Does the nylon wheel generate heat or noise when the cart runs all day under an 800 lb load?
The hard nylon tread rated at 85 Shore D rolls quietly on smooth surfaces and resists heat up to 550 °F, so continuous daily use under the 800 lb rating will not cause overheating or loud operation.
What axle size must my wheelbarrow or cart already have for this 4 in wheel to fit?
The wheel requires a 1/2 in axle; the included spanner bushing adapts the hub to that diameter, so your existing axle must match 1/2 in.
Will the 2 7/16 in hub length and 2 in tread width line up with the fork spacing on my older wheelbarrow?
The hub measures 2 7/16 in long and the tread is 2 in wide, dimensions common on many standard wheelbarrow forks, so it often fits without modification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
