ALABS AC22 XLR Condenser Microphone Kit 25mm Silver
A 25mm diaphragm XLR condenser kit with boom arm and pop filter for studio vocals and streaming
- ColorSilver
- ConnectorXLR
- Microphone Sensitivity38 decibels
- Microphone Impedance120 ohm
- Microphone Signal to Noise Ratio(SNR)40 decibels
- 25 mm capsule captures detailed vocals across 20 Hz to 20 kHz
- Cardioid pattern isolates voice while rejecting side and rear noise
- XLR connection needs 48 V phantom power for stable professional recording
- 38 dB sensitivity and 40 dB signal-to-noise ratio deliver clear output
- Kit includes boom arm and pop filter for complete podcast setup
What the kit is and who it suits
The ALABS AC22 is a new XLR condenser microphone kit built around a 25mm capsule and a cardioid pickup pattern. It targets streamers, podcasters and vocalists who want studio-style capture without a USB shortcut. The bundle includes a boom arm and pop filter so the core recording chain is complete in one box. Buyers who need a plug-and-play USB mic or wireless freedom should look elsewhere.
Build quality and daily connections
The microphone body uses a silver finish and terminates in a standard XLR connector that locks securely into an interface or mixer. Because the capsule requires 48V phantom power, the mic will not work when plugged straight into a computer, tablet or phone; an external audio interface, mixer or preamp must sit between them. The supplied boom arm clamps to a desk and the pop filter mounts on the arm, giving a tidy, adjustable setup that stays put during long sessions.
Thermals noise and power draw
Passive condenser operation means the AC22 draws only the 48V phantom current supplied by the preamp, so there is no separate power brick or heat source on the desk. Self-noise is rated at 40 decibels signal-to-noise ratio with a sensitivity of 38 decibels, yielding a quiet floor for spoken-word and vocal work. The cardioid pattern rejects off-axis sound, helping keep background hum and room echo out of the recording without any active noise-cancellation circuitry.
Highlights
- 25 mm capsule captures detailed vocals across 20 Hz to 20 kHz
- Cardioid pattern isolates voice while rejecting side and rear noise
- XLR connection needs 48 V phantom power for stable professional recording
- 38 dB sensitivity and 40 dB signal-to-noise ratio deliver clear output
- Kit includes boom arm and pop filter for complete podcast setup
Specifications
| Brand | ALABS |
|---|---|
| Model | AC22 |
| Part Number | AC22 |
| Color | Silver |
| Connector | XLR |
| Microphone Sensitivity | 38 decibels |
| Microphone Impedance | 120 ohm |
| Microphone Signal to Noise Ratio(SNR) | 40 decibels |
Questions about this item
What does the XLR connector on the AC22 require to operate?
The XLR connector requires 48V phantom power from an audio interface, mixer, or preamp; it cannot run directly from a PC, tablet, or phone without that power source.
What hardware is included in the kit for mounting the AC22?
The kit includes a boom arm and a pop filter so the microphone can be positioned and shielded from plosives right out of the box.
How is the AC22 connected and what step is often missed?
Connect the XLR cable to the microphone and your interface, then enable 48V phantom power on the interface before recording; forgetting to switch on phantom power is the common mistake.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



