Hollaender
Hollaender 70-7 External Coupling Aluminum 1.25 in storage shed
- 0.38
$10.99
0.00013146BTC
In stock
Akro-Mils
Akro-Mils 30282RED Red Storage Shed 20"L x 12-3/8"W x 12"H
A red industrial-grade polymer hopper bin measuring 20 by 12 3/8 by 12 inches with 1.2 cu ft capacity and a 200 lb load rating
- Large 1.2 cu ft capacity stores bulky items
- 200 lb load rating supports heavy parts and tools
- Industrial-grade polymer resists impact and chemicals
- Molded-in rear handle allows easy transport
- Three divider slots enable custom organisation
Industrial Hopper Bin 1.2 cu ft
The Akro-Mils 30282RED is a red industrial-grade polymer hopper bin offering 1.2 cubic feet of volume capacity. Its outside dimensions are 20 inches long, 12-3/8 inches wide and 12 inches high. Inside dimensions measure 16-7/8 by 10-11/16 by 11-3/8 inches. A molded-in rear carry handle aids transport.
Suits High-Density Parts Storage
This bin suits workshops needing stackable high-density storage for heavy items up to 200 lb. Three long divider slots accept Grainger divider 10A047 for compartment organisation. It is not for users requiring ESD-conductive containers or those needing smaller footprints for tight shelving bays.
Load Capacity 200 lb Decides Fit
The 200 lb load capacity is the single specification that determines whether this bin handles your heaviest parts. Verify your typical load stays at or below this limit before purchasing.
Highlights
- Large 1.2 cu ft capacity stores bulky items
- 200 lb load rating supports heavy parts and tools
- Industrial-grade polymer resists impact and chemicals
- Molded-in rear handle allows easy transport
- Three divider slots enable custom organisation
Specifications
| Brand | AKRO-MILS |
|---|
Questions about this item
Does this shed require any additional hardware or foundation to be installed?
This is a standalone hopper bin made of industrial grade polymer. It includes a molded-in rear carry handle and does not require separate mounting hardware or a prepared foundation to function.
Can I use my existing Grainger dividers with the three divider slots along the length?
Yes, the bin is designed for use with Grainger Divider No. 10A047 and provides three divider slots along the 16 7/8 in inside length for custom compartments.
How can I verify the bin is holding its rated 200 lb load capacity without deforming?
Load the bin up to 200 lb and check that the industrial grade polymer walls and 11 3/8 in inside height remain rigid, with no bowing of the 10 11/16 in inside width or 16 7/8 in inside length.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
