We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
AJA OG-FIDO-2R openGear card with dual LC fiber inputs and two BNC outputs

Aja Video Systems

AJA OG-FIDO-2R openGear 2-Channel Single Mode LC Fiber to 3G-SDI Receiver

SKU CH-2KQT-PJXCE

Converts single mode LC fiber to 3G-SDI over 10 km with two independent channels and SMPTE-259/292/424 compliance

  • Converts single-mode LC fiber to 3G-SDI over 10 km (32,808 ft)
  • Two independent channels accept different 3G-SDI rates on each fiber input
  • Auto-selecting reclocking covers 270 Mbps to 2.970 Gbps for format-agnostic operation
  • Dual 3G-SDI BNC outputs compliant with SMPTE 259/292/424 standards
  • DashBoard remote control and monitoring on Windows, macOS and Linux

AJA OG-FIDO-2R openGear Fiber Receiver

The AJA OG-FIDO-2R is a professional 2-channel fiber to 3G-SDI receiver built for openGear frames. It converts single-mode LC fiber signals into independent 3G-SDI BNC outputs for broadcast and production workflows. Remote monitoring and configuration are managed through DashBoard software on Windows, macOS, and Linux.

Dual-channel 3G-SDI capacity and distance headroom

Each channel handles SDI rates from 150 Mbps up to 3 Gbps with auto-selecting reclocking at 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, and 2.970 Gbps. The receiver extends signals up to 10 km (32,808 ft) over standard single-mode fiber using a 1260-1620 nm wavelength range. It operates reliably within a 0 to 40°C temperature range.

openGear frame compatibility decides fit

This card requires an openGear 2RU frame such as the AJA OG-X-FR for power and mounting. It provides two independent fiber inputs with reclocking and SMPTE-259/292/424 compliant BNC outputs. Systems without an openGear frame cannot use this module.

Highlights

  • Converts single-mode LC fiber to 3G-SDI over 10 km (32,808 ft)
  • Two independent channels accept different 3G-SDI rates on each fiber input
  • Auto-selecting reclocking covers 270 Mbps to 2.970 Gbps for format-agnostic operation
  • Dual 3G-SDI BNC outputs compliant with SMPTE 259/292/424 standards
  • DashBoard remote control and monitoring on Windows, macOS and Linux

Specifications

No published specifications for this item yet.

Questions about this item

Will the dual BNC outputs on this receiver work with my older SMPTE-259 SD-SDI monitors?

Yes, the two independent 3G-SDI BNC outputs are compliant with SMPTE-259, 292 and 424, so they will drive legacy SD-SDI equipment directly.

How can I verify each fiber channel is locked and reclocking correctly after installation?

Use the DashBoard software on Windows, macOS or Linux to monitor input status, reclocking rates and jitter tolerance for both channels remotely.

Does the card ship with the LC single-mode patch cables needed to reach 10 km?

No, only the openGear card with fixed LC connectors is supplied; single-mode fiber patch cables must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.