AirSept
AirSept 76214 line splice hi side service T 1/2 inch OD solar
Line splice with service port connects 1/2 inch OD lines for A/C, heater and transmission systems
- TypeAccessories & Compressors
- Aluminium and rubber construction resists corrosion
- High-side service T-port enables pressure checks
- Compact 3-3/4 × 2-3/4 × 1-1/4 in profile fits tight engine bays
- Anti-vibration tension rings absorb engine shake
- Eight-piece kit includes coupler body, nuts, sleeves and rings
AirSept 76214 line splice for solar A/C systems
This AirSept 76214 line splice provides a high-side service "T" connection for 1/2 inch OD tubing in solar-powered air-conditioning equipment. It suits installers and technicians who need a permanent service port on aluminium or rubber lines. The kit includes the coupler body, nuts, sealing sleeves and anti-vibration tension rings for a complete assembly. Buyers needing a different tubing diameter or a low-side service port should select another fitting.
Thermals, noise and power draw in normal use
The aluminium and rubber construction handles typical refrigerant temperatures and pressures without adding electrical load or audible noise to the system. Sealing sleeves and tension rings maintain a leak-free joint while damping vibration from the compressor or pump. No power is consumed by the fitting itself, so it does not affect the solar array output or battery draw during standard operation.
Behaviour under sustained load
Under continuous high-side pressure the coupler body and sealing sleeves retain their integrity without deformation or leakage. Anti-vibration rings prevent fastener loosening during prolonged compressor cycling common in solar thermal applications. The eight-piece kit provides enough components for multiple service points or future maintenance without requiring additional purchases.
Highlights
- Aluminium and rubber construction resists corrosion
- High-side service T-port enables pressure checks
- Compact 3-3/4 × 2-3/4 × 1-1/4 in profile fits tight engine bays
- Anti-vibration tension rings absorb engine shake
- Eight-piece kit includes coupler body, nuts, sleeves and rings
Specifications
| Brand | AIRSEPT |
|---|---|
| Type | Accessories & Compressors |
Questions about this item
How do I install the AirSept 76214 line splice on a 1/2 inch OD line and what step is often missed?
Cut the line cleanly, slide the nut and sealing sleeve onto each end, insert the coupler body with service port, then tighten the nuts while the anti-vibration tension rings seat fully against the sleeve — skipping the ring seating causes leaks.
Which parts of the AirSept 76214 kit will need replacement after extended A/C system service?
The rubber sealing sleeves and anti-vibration tension rings degrade from refrigerant oil and heat cycles; replace them whenever the line is disconnected or during major A/C service.
What pressure or temperature limit appears first when the AirSept 76214 splice sees sustained high-side A/C load?
The rubber sealing sleeves reach their temperature tolerance before the aluminum body, so sustained high-side heat is the first limiting factor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
