We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small white network adaptor with Ethernet port and power input

AIPTEK

AIPTEK JKW-IP IP Network Adaptor 2 in 1 accessory

SKU CH-YVTP-CPWYH

Connects JK Series video intercoms to 10/100 Ethernet networks using TCP/IP and SIP protocols with QVGA JPEG video

  • Connects JK intercoms to IP networks via 10/100 Ethernet
  • Supports SIP and TCP/IP protocols for VoIP integration
  • Powers directly from the JK master monitor at 18 VDC
  • Draws only 110 mA standby and 200 mA maximum current
  • Delivers QVGA 320240 JPEG video over the network

Network Adaptor for JK Series Intercom

The Aiphone JKW-IP connects a JK Series video intercom to an IP network using 10BASE-T/100BASE-TX Ethernet. It draws 18 VDC from the master monitor and consumes 110 mA in standby or up to 200 mA at peak. The unit handles TCP/IP, UDP/IP and SIP signalling for hands-free, priority voice transmission.

Installation notes

Power is shared with the JK master monitor, so no separate supply is required. A single Ethernet cable carries both data and control traffic once the adaptor is seated. Mis-wiring the shared power rail or exceeding the 200 mA peak draw are the most common issues that prevent the intercom from registering on the network.

QVGA JPEG video specification

The adaptor streams video at 320240 resolution in JPEG format over the SIP session. This fixed QVGA output determines whether the image quality meets the project requirements; no higher resolution or alternative codec is supported by this model.

Highlights

  • Connects JK intercoms to IP networks via 10/100 Ethernet
  • Supports SIP and TCP/IP protocols for VoIP integration
  • Powers directly from the JK master monitor at 18 VDC
  • Draws only 110 mA standby and 200 mA maximum current
  • Delivers QVGA 320240 JPEG video over the network

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the JKW-IP network adaptor is operating correctly after connecting it to the JK master monitor?

The adaptor shares 18 VDC power with the master monitor. After setup, verify the network link LEDs show a 10BASE-T or 100BASE-TX connection and that SIP registration succeeds on the intercom system.

What comes in the box with the JKW-IP adaptor and what must be purchased separately?

The package contains the JKW-IP network adaptor unit only. A JK series master monitor to supply 18 VDC power and an Ethernet cable for the 10/100BASE-TX port are required but not included.

Which version of the JKW-IP should I choose for a QVGA video intercom installation?

The JKW-IP supports 320240 QVGA JPEG video over TCP/IP, UDP/IP and SIP. Select this single model when the intercom system requires that resolution and those network protocols.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.