We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact 24 V pure sine inverter with dual AC sockets, on/off switch, DC cables and cigarette plug

AIMS Corporation

AIMS Corporation PWRI30024S 300 W 24 V pure sine power inverter

SKU CH-DFNV-E468D

Delivers 300 W continuous pure sine wave output at 120 V from a 24 V battery with dual AC receptacles, load-based cooling and integrated cables

  • FeaturesSupports Flooded Lead Acid (FLA), GEL, Absorbed Glass Mat (A
  • Clean 120 V AC from pure sine wave protects sensitive electronics
  • 300 W continuous and 600 W peak handles startup surges
  • Load-based fan stays silent until power is drawn
  • Dual AC receptacles let you run two devices at once
  • Operates from -15 °C to 55 °C for harsh environments

AIMS PWRI30024S 300 W Pure Sine Inverter

The AIMS PWRI30024S is a 300 W pure sine wave power inverter that converts 24 V DC input into 120 V AC output at 60 Hz. It provides 300 W continuous power with a 600 W surge capability and delivers a regulated waveform within +/- 3% for sensitive electronics.

Suits off-grid or mobile 24 V systems.

This inverter suits off-grid or mobile setups running from a 24 V battery bank, accepting 20.4 V to 31 V DC input. It supports Flooded Lead Acid, GEL and AGM chemistries with adjustable multi-stage charging. It is not for systems built around a higher-voltage battery bank or installations that require more than 300 W of continuous output.

24 V DC input range with 300 W continuous rating

The defining specification is the 24 V DC nominal input with an operating window of 20.4 V to 31 V and a continuous output rating of 300 W. The unit includes dual AC receptacles, a load-controlled fan, DC cables with alligator clamps, a cigarette-lighter plug and an on/off switch. Full-load efficiency reaches 90% and the inverter shuts down automatically at 55 °C.

Highlights

  • Clean 120 V AC from pure sine wave protects sensitive electronics
  • 300 W continuous and 600 W peak handles startup surges
  • Load-based fan stays silent until power is drawn
  • Dual AC receptacles let you run two devices at once
  • Operates from -15 °C to 55 °C for harsh environments

Specifications

BrandAIMS
FeaturesSupports Flooded Lead Acid (FLA), GEL, Absorbed Glass Mat (AGM) batteries; 2/3/4-stage charging with adjustable set points for all parameters.

Questions about this item

What size battery bank and DC cables does the 300 W 24 V inverter require for safe mounting?

The unit accepts 20.4–31 V DC input and draws up to 12.5 A at full load; use a 24 V battery bank and the supplied alligator-clamp cables rated for that current.

How do I install the PWRI30024S and what step is most often missed?

Connect the red clamp to positive and black to negative on a 24 V battery, plug loads into the dual 120 V AC receptacles, then press the on/off switch; the step most often missed is verifying correct polarity before powering on.

What maintenance will the inverter need over time?

Keep the load-based fan vents clear of dust, check battery terminals for corrosion, and ensure the operating temperature stays between -15 °C and 55 °C to avoid automatic shutdown.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.