AILIHEN Wired Over-Ear Earbuds White 3.5mm 10mm Driver 32 Ohm 98dB 1.2oz
Wired over-ear earbuds with 10 mm drivers, 32 ohm impedance, 98 dB sensitivity and an in-line microphone for clear calls
- TypeOver the Ear
- ColorWhite
- Driver Unit10 millimeters
- Frequency Response20 hertz
- THDOver Ear
- Input Impedance32 ohms
- Secure over-ear hooks stay put during movement
- Gold-plated 3.5mm plug works with laptops and tablets
- In-line button controls calls and music playback
- Reinforced 4-foot cable resists tangles and fraying
- Noise-isolating design blocks ambient sound for focus
Secure Over-Ear Fit
These wired earbuds use an ergonomic over-the-ear hook that keeps them in place during movement. The 3.5 mm connector provides a stable, zero-latency link to laptops, tablets and desktop PCs. They are suited to students and commuters who need a reliable wired connection without battery concerns.
Consistent Wired Performance
Because the signal travels over a physical cable, audio quality and microphone clarity do not vary with wireless interference or battery state. The 32 ohm impedance and 98 dB sensitivity deliver steady output during long study sessions or calls. There is no compression or drop-out behaviour to manage.
Passive Isolation and Light Weight
The in-ear silicone tips create a physical seal that reduces ambient noise without active circuitry. At 1.2 ounces the earpieces add negligible pressure during extended wear. Power is drawn directly from the host device, so there is no separate charging requirement or heat build-up.
Highlights
- Secure over-ear hooks stay put during movement
- Gold-plated 3.5mm plug works with laptops and tablets
- In-line button controls calls and music playback
- Reinforced 4-foot cable resists tangles and fraying
- Noise-isolating design blocks ambient sound for focus
Specifications
| Brand | AILIHEN |
|---|---|
| Model | Wired Noise Cancelling In-ear Earphones, over ear headphones 3.5mm aux |
| Type | Over the Ear |
| Color | White |
| Driver Unit | 10 millimeters |
| Frequency Response | 20 hertz |
| THD | Over Ear |
| Input Impedance | 32 ohms |
| Signal to Noise Ratio(SNR) | 98 decibels |
| Sensitivity | 98 decibels |
| Connector | 3.5mm |
| Ear Coupling | Single Ear |
| Weight | 1.2 ounces |
| Noise Cancelling | sound_isolation |
| Wireless Type | IR |
| Microphone Impedance | ~3K ohm |
| Microphone Frequency Response | 20 hertz |
| Microphone Signal to Noise Ratio(SNR) | 98 decibels |
| Microphone Sensitivity | 98 decibels |
| Features | sound_isolation, Tangle-resistant Wired Cable With 3.5mm Aux Connector, In-line Control, push_button, Wired, Over Ear, dynamic_driver, 32 ohm |
Questions about this item
Does the 32-ohm impedance and 98 dB sensitivity mean the earbuds run cool and draw very little power from my phone all day?
At 32 ohms and 98 dB sensitivity, the earbuds need only a tiny voltage swing from any 3.5 mm source, so they stay cool and impose negligible battery drain during extended listening.
What device must I already have for the gold-plated 3.5 mm plug and in-line microphone button to work?
Any laptop, tablet, phone or MP3 player with a standard 3.5 mm headset jack — the single TRRS connector carries both stereo audio and the microphone signal for the one-button remote.
Will the 10 mm dynamic driver and sound-isolation fit still seal properly if I keep using my older 3.5 mm equipment?
Yes — the 10 mm driver and over-ear hook design rely only on the analogue 3.5 mm interface, so they deliver the same isolation and bass response on legacy players as on new devices.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sony
Sony ZX Series MDR-ZX110AP Wired On-Ear Headphones White 30mm 3.5mm
- Headphone
$16.99
0.0002004BTC
In stock
usbroway
usbroway 10-pack VHF Antenna 136-174MHz for Motorola HT1000 MTS2000 XTS2500 XTS3000 XTS3500
- Two-way Radio
$38.99
0.00045989BTC
In stock